Stone56
Well-Known Member
- Posts
- 4,161
- Location
- Up a mountain
We had are first Hoopoe arrive yesterday was still about this morning but still not heard a Cuckoo yet 
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 46,687
- Location
- East Dorset
- Posts
- 46,687
- Location
- East Dorset
Have to admit that garage floor paint is one of the best things I ever did. It was a bit of a Kev as my neighbour had a lot left over so he gave it to me. My present garage doesn't have it so I put down cardboard and old carpet!!
- Posts
- 46,687
- Location
- East Dorset
Re the doghouse. Did she cook your dins on the seduction hob and discover what a pain they are to use...... and clean up after??Think im in the dog house ?? Not sure as not many words been exchanged this morning.
bugger off outside to see what im going to do with that stripped stud. Just wondering if I can get the diff away from the
axle with a leaver & have enough pressure on the nut to buzz the stud out. Or burn it off in 10 seconds
Been hearing Cuckoos for a few days now.We had are first Hoopoe arrive yesterday was still about this morning but still not heard a Cuckoo yet
J
Painted mine with a 2 part Jotun paint, it’s not non slip but it’s pretty resistant to oils and such.
It gets slippy though so need to mop up spills.
J
- Posts
- 9,232
- Location
- Solent
Me Tratter is MIA. Latest opinion is it's just the head gasket, the head has gone oft for checking and skimming. Fingers crossed (and anything else that will perform the same trick).
#missmetratter
#missmetratter
Stone56
Well-Known Member
- Posts
- 4,161
- Location
- Up a mountain
Not to bad then good job it's not a FL would have been scrapping it
Hippo
Lord Hippo
- Posts
- 55,005
Iffit were a freelander it wooddent of broke'd.Not to bad then good job it's not a FL would have been scrapping it
- Posts
- 23,867
- Location
- In the next Glen
I took pallets of jotun paint off the ship, choice of colours...yellow,green,blue,white orange& red. We use loads of paint in the yard
to make non slip we add sand. You need to keep stirring the tin as the sand falls to the bottom of the tin.
- Posts
- 23,867
- Location
- In the next Glen
More like marbles bloody size of them, It was good to watch them in the sunshine
- Posts
- 23,867
- Location
- In the next Glen
- Posts
- 23,867
- Location
- In the next Glen
Have to admit that garage floor paint is one of the best things I ever did. It was a bit of a Kev as my neighbour had a lot left over so he gave it to me. My present garage doesn't have it so I put down cardboard and old carpet!!
Come to think of it ive got proper garage floor paint in the shed somewhere, you wont believe this but I got 100 odd lts free
I did sell some & gave some away to my mates I'll have a look & see whats in my paint store.
- Posts
- 23,867
- Location
- In the next Glen
- Posts
- 6,977
- Location
- uk
Did the therapy afterwards work?
- Posts
- 23,867
- Location
- In the next Glen
- Posts
- 23,867
- Location
- In the next Glen
- Posts
- 6,977
- Location
- uk
Oh yea?
Freelander Faults poll
just an in-house poll on the most common Freelander 1 problems, Please vote and try to explain any of your FL faults and problems in a post below. Please try to keep the problem to a fault or premature failure rather than wear and tear. Thanks
www.landyzone.co.uk
- Posts
- 46,687
- Location
- East Dorset
I love the optimistic note of closing the poll in 2035!!!Oh yea?
Freelander Faults poll
just an in-house poll on the most common Freelander 1 problems, Please vote and try to explain any of your FL faults and problems in a post below. Please try to keep the problem to a fault or premature failure rather than wear and tear. Thanks
Hippo
Lord Hippo
- Posts
- 55,005
Yer bin sniffing round the freelander section. Finking of buying one? Yer know it makes sense rodney. @landowner confirm.Oh yea?
Freelander Faults poll
just an in-house poll on the most common Freelander 1 problems, Please vote and try to explain any of your FL faults and problems in a post below. Please try to keep the problem to a fault or premature failure rather than wear and tear. Thanks
Similar threads
