Hippo
Lord Hippo
- Posts
- 55,000
They stopped ferra picnicJust like a Freelander, only got halfway up the hill and they had to get out and walk
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 17,247
- Location
- Benfleet, Essex
Morning All. 
Another Sunny one here.
Have a great Sunday.
Another Sunny one here.
Have a great Sunday.
Hippo
Lord Hippo
- Posts
- 55,000
Edgar gets a bit temperamental on a full moonFull moon another restlessness night, any one else suffer with moon sickness , and no cracks about werewolfs Or ill bite you
- Posts
- 6,977
- Location
- uk
Cut me grass this morning. Then got ready to apply the weed feed n moss killer. But the instructions say don't apply until four days after cutting. So it's still in the sack.
- Posts
- 23,861
- Location
- In the next Glen
D1 taken apart...front axle stripped, yup wrecked a halfshaft both shafts out. Need an offside one, diff still in as
one stud decided it wanted to strip & not come out. I have spare HD raptor shafts but I aint fitting them as ive sold
it plus its not fully paid for so I'll still be using it. Would like to get some off roading done but got loads of things
to do.
one stud decided it wanted to strip & not come out.
I have spare HD raptor shafts but I aint fitting them as ive soldit plus its not fully paid for so I'll still be using it.
Would like to get some off roading done but got loads of thingsto do.
- Posts
- 23,861
- Location
- In the next Glen
Think im in the dog house ?? Not sure as not many words been exchanged this morning. I'll finish my coffee then
bugger off outside to see what im going to do with that stripped stud. Just wondering if I can get the diff away from the
axle with a leaver & have enough pressure on the nut to buzz the stud out. Or burn it off in 10 seconds
I'll finish my coffee thenbugger off outside to see what im going to do with that stripped stud. Just wondering if I can get the diff away from the
axle with a leaver & have enough pressure on the nut to buzz the stud out. Or burn it off in 10 seconds
Stone56
Well-Known Member
- Posts
- 4,160
- Location
- Up a mountain
ditto but just used fertilizer then pumped water from main tank up to the allotment tanks just in time as it started raining, but still got wet
Stone56
Well-Known Member
- Posts
- 4,160
- Location
- Up a mountain
Well if you want some peace and quiet burn it off in 10 seconds and go indoorsThink im in the dog house ?? Not sure as not many words been exchanged this morning.
bugger off outside to see what im going to do with that stripped stud. Just wondering if I can get the diff away from the
axle with a leaver & have enough pressure on the nut to buzz the stud out. Or burn it off in 10 seconds
- Posts
- 13,019
- Location
- Far out West
- Posts
- 23,861
- Location
- In the next Glen
Well if you want some peace and quiet burn it off in 10 seconds and go indoors
Managed to get it out, I jacked up the diff to break the seal then used a leaver between the diff/axle casing to put pressure on the nut & buzzed it off. Then the rain came on so came in for a coffee.
Stone56
Well-Known Member
- Posts
- 4,160
- Location
- Up a mountain
Not in your new garage then ?
- Posts
- 23,861
- Location
- In the next Glen
saxavordian
Well-Known Member
- Posts
- 9,650
So you trimmed your pubes. Then wanted put aftershave on. But bottle says not for gonads area. So now itching in around your sack
Hey interpretation if you wish
Or the place you hid your stash in the roof needed weeding
But your touts want a sack full in four days time.
Happy Sunday
Stone56
Well-Known Member
- Posts
- 4,160
- Location
- Up a mountain
Need some drip trays ! Did you seal the over site concrete, worth having a look at some poly floor paint give it that professional lookHell no & get oil on the new floor
- Posts
- 23,861
- Location
- In the next Glen
Not sealed it yet, I was thinking of doing a coloured epoxy floor. Ive just fitted the last piece of ridge plate yesterday
I got them last sat & went to fit them, the one in the middle was all scratched so I took it back yesterday & changed
it. The lad brought the replacement out which was also scratched so I asked if I could come & pick one as I wanted
a decent one. So I pulled them all out, took a good one & left him to put them back on the racking.
- Posts
- 13,019
- Location
- Far out West
It twas hailstones here earlier, which was nice
- Posts
- 6,977
- Location
- uk
Wot have you been smoking and can I have some pleaseSo you trimmed your pubes. Then wanted put aftershave on. But bottle says not for gonads area. So now itching in around your sack
Hey interpretation if you wish
Or the place you hid your stash in the roof needed weeding
But your touts want a sack full in four days time.
Happy Sunday
- Posts
- 13,019
- Location
- Far out West
Wot have you been smoking and can I have some please
Some pubes in a rizzla I think
Stone56
Well-Known Member
- Posts
- 4,160
- Location
- Up a mountain
I think you can get a non slip epoxy for floors with spillage would be goodNot sealed it yet, I was thinking of doing a coloured epoxy floor. Ive just fitted the last piece of ridge plate yesterday
I got them last sat & went to fit them, the one in the middle was all scratched so I took it back yesterday & changed
it. The lad brought the replacement out which was also scratched so I asked if I could come & pick one as I wanted
a decent one. So I pulled them all out, took a good one & left him to put them back on the racking.
You pay the money for new not damaged !!
Similar threads
