- Posts
- 44,823
- Location
- East Dorset
TMIIm sitting here in my socks
TMIIm sitting here in my socks
Found this and thought ,gray.
If You Own Land, How Far Above and Below Do You Own?
On paper, the concept of land ownership sounds very simple- you pay money and in return you're given unfettered access to a predetermined amount of land.gizmodo.com
J
Ground Water is great for ground source, just sayingA district near to us, Belvedere, Kent, has the water table in most of it's area at a depth of four feet ...
So digging footings and such like is a bugger... most houses are built on a concrete 'raft' ...
When they were digging the foundation works for the Thamesmead Estate they were pile driving 24/7 for months ...
A brief history of Brutalist social estate Thamesmead
Thamesmead was designed to be a revolutionary housing estate but, like many of its Brutalist contemporaries, it failed to meet its utopian goals Thamesmead is a social housing estate built in the mid 1960s in outer Lnondon. It is situated on former marshland on the south of the Thames that was...www.iconeye.com
The South East London housing estate where Misfits was filmed
The brutalist 1960s architecture of Thamesmead has made it a popular backdrop for TV and filmmakerswww.mylondon.news
Sorry, I don't know what the DAvey DD was. My bad.Just to let you all know the Davey DD was 6 today.
They're quoted as 3+3 so 600% efficient.The Heat Pump CON
Electricity is 27p/Kwh. Gas is 6.7p/Kwh.
Even if heat pumps are 400% more efficient (which they aren't) then they are still about equal in cost.
4 x 6.7 = 26.8
So in my simple mind a an air-source heat pump that operates at 200-400% efficiency is never going to be better for me than my current boiler.
My daily Electric is 21Kwh, my daily gas is 63.8Kwh if I convert the gas Kwh into electric Kwh it will cost me more.
63.8 @ 6.8p is less than 63.8 @ 27/4 isn't it?
So why on earth would I change to air source heat pump?
Is that the wuf wuf?Just to let you all know the Davey DD was 6 today.
Nonsense. I don't care what they are quoted at.They're quoted as 3+3 so 600% efficient.
Part of the change to lectric heating via air or pipe underground is to make yer heating more efficient in energy use. It's not down to cost directly. In years to come we won't be allowed to burn fossil fuels. Or at least their use will be massively reduced across society so we work towards cleaning up the muck in the air. Where possible we have to work towards using greener fuel and use less ovvit. Like running a fasterer real Freelander wiv 4 cylinders than a big Freelander wiv 8.
It's how we do it here and a blanket if it's frosty!The worlds gone soft. Just put on thermal underwear, thick sox and an extra tee shirt. Who needs home heating ------
YesIs that the wuf wuf?
The more advanced newer systems available on the market can deliver 600% efficiency. This is because of how they compare burning fuel to creating it. Gas is burnt. Air source converts. It's the conversion that is efficient as yer shifting during conversion as opposed to burning. Problem is yer can't get more than 100% efficiency in normal logic. But in this case yer can, as a reference, as it's a comparison of conversion against generated, like burning.Nonsense. I don't care what they are quoted at.
I got a quote suggesting 200 -400% efficiency.
Let's assume a mid point 300%. It still does not pay.
A leaky home that cannot improve its heat-loss figures cannot win and is better off staying on gas at the cheaper Kwh price.
Well said. Eye puts me old coat on if eye is cold. Sod turing the heating up. Up yours pootin.The worlds gone soft. Just put on thermal underwear, thick sox and an extra tee shirt. Who needs home heating ------
Just missed the finger bone and thay wasn't ring sharks so lucky soon healed with a bit of tape wrapped round just a bit of bruisingOOOfft I wouldnt like to try & pull out a 90mm ring shank they dont want to come out at the best of times
Seen an x ray of my mates hand when he shot a nail in through the top of his hand.
He soon got to the point thenUsed to know a lad who worked in a clothing factory (shirt makers for M&S), he did maintenance on the industrial sewing machines. He was often required to pull a needle out of a girlie machinist's fingers. Had a pair of pliers in his tool kit for the task.
Not long now tis the time to be jollyChristmas is here ffs
View attachment 303548
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!