I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kermit_rr said:
To quote him, he has a diag, but reckoned it wouldn't do a proper job, so he'll send it to the dealer for a proper fix.. has he scammed me?
Click to expand...
It should regen itself if yer drive it gently continuously up to speed. It will get warm, know it needs a regen and do so when circumstances allow. If fer eggsample a sensor has failed or a wire come oft, then the regen process may not wurk. A diag will give an error code to say fer sure why its not wukkin. On the ocasion its all ok, a forced regen by a diagnostic tool is possible anorl.
 
Hippo said:
It should regen itself if yer drive it gently continuously up to speed. It will get warm, know it needs a regen and do so when circumstances allow. If fer eggsample a sensor has failed or a wire come oft, then the regen process may not wurk. A diag will give an error code to say fer sure why its not wukkin. On the ocasion its all ok, a forced regen by a diagnostic tool is possible anorl.
Click to expand...
thanks, there was a warning on the dash 'take to dealer' and had no power at all, felt software limited', i'm sure it will get fixed properly or i can throw it back.. just need to get the unlock codes for my nanocom haha
 
DanClarke said:
.... has anyone got direct experience of domestic dehumidifiers please?
We are experiencing some issues with condensation here at Clarke Towers and I want to assess the options.
Thanks in advance for your collective wisdom. :)
Click to expand...
i've got one, love it! don't use it all the time but sometimes if i've had to hang washing up inside to dry
 
Stanleysteamer said:
Air-powered reciprocating saws:
lighter,
cheaper, even the best quality ones cost less than the cheapest batt or corded
can get into smaller places
don't need to charge batts which also wear out eventually.
electric ones get hot.

Yes they need a compressor with decent air delivery, I've already got one.
Yes they are noisy but then all are, at least I can shut the door on the compressor so the only noise will be the saw itself, and I'll be using it out doors mostly, or in the garage workshop where its noise would only bother me and I can wear ear muffs.
This is why I want one.
Also with money saved I could buy other air powered tools like a die grinder, which can be fitted with a thin circular saw blade for fine work.
So what do people think? Sealey?;)
:):):)
Click to expand...
Fink about all that eggstra lectric to compress air. And the need to relace air pipes as they wear.
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
868
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
648
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top