I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Done nowt much so far today. Waitrose delivered, so helped wifey put it away, big order like so many as xmas is being sorted. Hot Camembert coming up for lunch, yummy!
Sorted out the Humax box so it'll take catchup from all channels. :rolleyes:, Apparently wifey can't do this.
Flipping annoyed about a ceiling downlight in the recently been installed kitchen. Moved from previous location, i.e. had to cut a new circle, used the cutout to fill in the previous hole, extended the wire with a chocbloc, drilled through a floor joist to get the wire through, attached to new fitting. All done ages ago, but ever since the bulb flickers and eventually dies. Thort it was the bulbs but am now convinced it is in the wiring. Typically it is intermittent, but seems to start after a while as if the problem needs to warm up first.
Dreading having to cut out the original hole again to remake the connection. Not like me to make this sort of mistake so hoping it is the light fitting itself. (old fashioned non LED or halogen type, about 6 to 8 inches across takes big screw in bulbs.)
Still, door very nearly finished, one coat to go then hanging. Came with kind of clingfilm stuck on the glass panels which worked a treat when it came to keeping the varnish off the glass. Brill!
Have a good day folks!:):):):):)
 
Feeling a bit of a **** now. :rolleyes:
I was cutting through the 3mm plywood that form the mini-shutters for the front windows on top of the breakfast bar.
I had a whole newspaper under the plywood sheet.:)
I still managed to go through everything and into the worktop underneath (even though the plywood had not separated at the cut-line) :eek:
Deep gouges on the work surface. Oops! :oops:
I scraped the tops of the gouges clear of the raised material and then gave it a light buffing with some 800 paper and then a coat of boot-polish and a buff with a cloth.
I did admit to it, as I knew she would spot it anyway. Now she's muttering curses that invoke the "New Onyx worksurface" beast. FFS! Its just a scratch. ;)
 
When the say make a bow wave...
4C312202-EFAA-4702-BF03-5D459E276F3E.jpeg
 
Spag bol fer tee. Eye came oat wuk urly ter paint bits ov wud. Bits ter add ont me doors ter support me weeuls. Eye paint er bit un lerrit dry un turn it over ter paint tuvva bit. Then wipe me brush ont news paper un purrit int me strewberry yoggut pot wiv wata innit. Eye as alreddy eatid yoggut sum time ergo. Eye be sat int chair now.
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
898
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
713
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top