woulda done had i found out yesterday, but no time now, im busy building a venomous room in me shed
as you do
Hertfordshire Lanes?????
- Thread starter 99claydond
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
woulda done had i found out yesterday, but no time now, im busy building a venomous room in me shed
as you do
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
woulda done had i found out yesterday, but no time now, im busy building a venomous room in me shed
Is that for your cold bloodied reptile,, Or are you putting ya snakes in there instead.
Is that for your cold bloodied reptile,, Or are you putting ya snakes in there instead.
im locking myself in there, public has had enough danger with me bein let loose
naa it will be for the more dangerous of the scorpions, and then rattlers, pit vipers and a few cobras in all likelihood
Glenn321
Active Member
- Posts
- 411
- Location
- hertfordshire
Your putting 44 inch tyres on your 90, that's going to play with some ratio's lol
na ent got a 90, the one in the pic is a 110!
its going on an 88
but its pretty much a ground up rebuild jobby so its not just an 88 with ****off tyres on it
Glenn321
Active Member
- Posts
- 411
- Location
- hertfordshire
na ent got a 90, the one in the pic is a 110!
its going on an 88
Was think a 90 or even a 110 with them 44 wouldnt be going very far lol they are big heavy old tyres. Still 88 sounds nice, u making like a
Challenge vehicle almost then.
a big ****off toy to **** around with on pay and plays, and see what sort of competitions i can start thinknig off. cant imagine those tyres would make it any good at challenge type competitions, its more one for ladoga type stuff, but would need alot of work to get it to that spec
gonna need alot of work and time, but im up for it, and will have some help on the way, should me many laughs when its done
Glenn321
Active Member
- Posts
- 411
- Location
- hertfordshire
Yeah alot of time but the big one MONEY haha, well if you need a hand mate just let me know. i will be back out with the guys soon my truck is almost done. sounds like you should end up with a nice toy thou
cool, got a few people offering that now. its a big job, and will work as and when them oney comes in, the big cost is the tyres. if i go from the EU distributers it will work out just over 2k for 4.
roll cage will be fabricated ourselves, panels and that will be salvaged from a series II i am breaking, engine, gearbox and chassis are sorted, so need to get hold of a proper decent set of axles, then probably get some new diffs, HD half shafts, and then we should have a rolling chassis. will see what happens after that
its a new one for me so who knows what might happen haha
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
that size tyre you can forget rover axles! Even ashcroft stuff its on its limit. Best do portals for strength and cost. Ashcroft front end is circa 1000 pounds without locking diff. Rear end about 500 no diff. 44 inch really is truck terrtory. Jai
Mr_V
Active Member
- Posts
- 351
- Location
- Boston, South Lincs
Hi gents,
Just a quickie.
I went to National Tyres in Dunstable to borrow their vice at the weekend, and they asked if I knew of a mechanic looking for work. I thought I'd let you guys know, just in case there was someone. It's a full time job, and they seem nice guys.
If ur interested have a wander down. They are on the corner of Houghton Road and the A5.
Just a quickie.
I went to National Tyres in Dunstable to borrow their vice at the weekend, and they asked if I knew of a mechanic looking for work. I thought I'd let you guys know, just in case there was someone. It's a full time job, and they seem nice guys.
If ur interested have a wander down. They are on the corner of Houghton Road and the A5.
classic kev
Well-Known Member
- Posts
- 3,506
Hi folks,
Don't think I'll make it to the pub!!
First one I've missed too. Hey ho. Have a good evening catch up soon.
Cheers.
Don't think I'll make it to the pub!!
First one I've missed too. Hey ho. Have a good evening catch up soon.
Cheers.
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
Everything alright Kev? Missed ya tonight!
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
Anyone got a driver's seat for my disco going for a song?
actually, i dunno if its the same type of seat as you got but i had a disco drivers seat in my series which i just stripped, seats sitting in the shed in the garden if you want it. was just gonna skip it
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
Blimey mate... at least let me see if it will fit! Cheers!
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
OK I know I will get stick for this... but it makes me proud...
[ame="http://www.youtube.com/watch?v=_AOPu2oiaB8"]YouTube- Kai_Offroading.MP4[/ame]
[ame="http://www.youtube.com/watch?v=_AOPu2oiaB8"]YouTube- Kai_Offroading.MP4[/ame]
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
****er My last disco seat sold last week oin ebay to somone in Sundon park.
If I get anymore you can have one Jai
If I get anymore you can have one Jai
yea no worries, its all yours if you want it i got no use for it, like i said was gonna go skip it coz its no use to me anymore.
nice video, i got a few vids up on photobucket and ebay
