Hertfordshire Lanes?????

sible88 · Jul 9, 2011

I will be at billing on the Saturday!

landroverjack · Jul 9, 2011

So tired right now. Work is taking the **** and roads seem to all be gridlocked. Supposed to be moving into the new house on Monday but theres still so much to do and I'm working tomorrow as well!! Guess what i saw today though! Didnt get a chance to talk to them but a pretty impressive beast they seem to have converted themselves..

DutchCourage2

jai_landrover · Jul 9, 2011

This morning I drove 226 mile round trip for a seat belt!

Woop!

Billing I shall be there one day. However no money at all I brought some goodies at Paddocks this morning. Tried to fit the seat belt and the goodies when I got back but we sorted out some stuff we had kicking about instead. Seat belt is done so All Good for tomottow. Goodies shall have to wait. :-(

Bring on Trialling tomorrw. Ryder be at yours at 8.15.

jai_landrover · Jul 10, 2011

Many thanks to Ryder and Kai for navigating and pit crew at the trial to Roundhill today! Thanks again guys. We lost a few silly points for erm driver error but I had a good day I hope you both did too.
ATB

Jai

B3aker · Jul 10, 2011

Rite, sounds like I'm missing out on all the fun. So once i get back from holiday i need to get the landy running so i can join in the fun.

Traffic has been rubbish the back end of this week at home, not too sure why, I know a few schools have finished but the traffic normally get quieter. Dover was rammed on satuday afternoon. Plus there have been a few festivals on in the area so that may have added to the traffic.

What goodies did you get Jai?

jai_landrover · Jul 10, 2011

some noo rear shocks that we fitted while changing tyres this morning plus 2 inch pro comps. Been on my wish list for a while but never got arounf to buying them unfortunatly. Means 2 inch more droop and compression is not an issue. Still up to the bump stops anyway as the std shocks didn't get anywhere near full compression even with the bump stops removed and the axle hitting tne chassis rails. Should give more axle droop some tests still to carry out but so far so good!

sible88 · Jul 12, 2011

Am I suppose to be able to pull this out the engine without tools?

sible88 · Jul 12, 2011

Is it my dipstick?

jamesmartin · Jul 12, 2011

looks bad enough not to have removed sump to remove it ,

sible88 · Jul 12, 2011

Nah it feel out the side!!! Big hole!!

sible88 · Jul 12, 2011

Get this it still runs????

sible88 · Jul 12, 2011

Not the best pic but can see the hole a bit! Oh yeah and there was a small fire :-(

sible88 · Jul 12, 2011

This one is a bit better.

Spyderman · Jul 12, 2011

Sible,
I take it the V8 will be going back in then?

jai_landrover · Jul 12, 2011

conversions isn't your strong point then¬

sible88 · Jul 12, 2011

My mate decided to tinker with the turbo and fuel pump!! So I am having his engine!

jai_landrover · Jul 12, 2011

v8's too fast you end up in a field,
300's too slow so you wind it up and blow it up Tut tut!

Reliable me thinks not!

Hehe

Jai

jai_landrover · Jul 12, 2011

Hey Booger! hows thee?

sible88 · Jul 12, 2011

My mate being a nob didn't stop tinkering he got it to 3 bar boost but only for 10 mins!! Idiot. I didn't mind too much as I am getting a lower mileage 300.

jai_landrover · Jul 12, 2011

EGT and Intake Temp really important bigger inter cooler ect all bit late now.

What you doing with the old unit?

Hertfordshire Lanes?????

New Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Attachments

New Member

Well-Known Member

New Member

New Member

New Member

Attachments

New Member

Attachments

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Similar threads