Hertfordshire Lanes?????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tried to move the 109 today. I wanted to get it into a position where the transporter could winch it straight onto the load bed. Not very successful. The hadbrake seems to be seized on, either that or the transmission has seized.

consequently I am hoping to get one of you lovely people with a winch to pull the motor into position. I know that it will take a little work but if anyone is up to the challenge?

Cheers guys!

I'm free Monday night, Landy is back together. Let me know if you want me to winch it out?
 
Jai whatever you tried to send me didnt work

My clutch has no pressure at all :mad: I think some pipe or hose must have burst in the cold ffs... I'll have to go look when it stops raining.. :(
 
Thanks for the help this evening Brett.... vehicle now ready to rotate ready for the transporter...

BTW Brett, you have your driver's side brake light out.
 
Thanks for the help this evening Brett.... vehicle now ready to rotate ready for the transporter...

BTW Brett, you have your driver's side brake light out.


Thanks, it's the poxy ****part holder, the bulb keeps falling out. I've bought a new one just need to fit it.
 
Certainly not me :D Been fixing the landy (somehow :D) Nice grubby fingers!

Clutch fluid was low and the only pressure in the pedal was the spring holding it back. Couldn't find any leak whatsoever so topped it up and pumped pedal for 5 mins. Gradually it came back and now seems fine again. No fluid lost in reservoir :confused: Works fine, just drove around and everything is ok, still no fluid lost.

I am at a loss as to how I lost the fluid over the cold night on friday into saturday. :confused:
 
Back
Top