Hertfordshire Lanes?????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dates for next years comps with Anglian. Any CSMA Event is open to all Vehicles must be MOT'd/ safe and road legal. Other events run under ALRC Regs.

Nationals and Slab Common treasure hunt not to be missed!!!!! Also Essex Gateway is a GOOD Site as are many others Roundhill and Brickhill for example!!


22nd January 2012 TYRO / RTV / CCVT Weston Underwood Anglian LRC & Chiltern Vale LRC


11th-12th February 2012 RTV / CCVT Essex Gateway, Lakeside Essex LRC


25th February 2012 TYRO / Treasure Hunt /CCVT/JTV Roundhill Woods Anglian LRC /CSMA


25th March 2012 TYRO / RTV / CCVT/JTV Quainton Anglian LRC & Chiltern Vale LRC


6th-9th April 2012 COMP SAFARI / JTV / TYRO / RTV / CCVT / Bike Trial - Camping Essex Gateway, Lakeside
Essex LRC



22nd April 2012 RTV / CCVT Sewell Anglian LRC & Chiltern Vale LRC


7th May 2012 Comp Safari Baden Hall Staffs and Shrops LRC


13th May 2012 JTV / TYRO / RTV / CCVT Brickhill Anglian LRC & Chiltern Vale LRC


2nd-4th June 2012 NATIONAL RALLY Belvoir Castle P&D/Lincs LRC


9th June 2012 JTV / TYRO Charity Event - Berkhamsted Anglian LRC


16th-17th June 2012 TYRO / Treasure Hunt / RTC /CCVT - Camping Available Slab Common Anglian LRC /CSMA


1st July 2012 JTV / TYRO / / Bike Trial (Inc Tyro inter Regional MSA Junior Championship - Camping available Roundhill Woods Anglian LRC & ALRC


29th July 2012 TYRO / RTC / CCVT / Bike Trial - BBQ - Camping Available Roundhill Woods Anglian LRC & Chiltern Vale LRC


23rd September 2012 TYRO / RTV / CCVT Sewell Anglian LRC & Chiltern Vale LRC


21st October 2012 JTV / TYRO / RTV / CCVT Quainton Anglian LRC & Chiltern Vale LRC


3rd November 2012 CCV / Tyro / Treasure Hunt Roundhill Woods Anglian LRC /CSMA


19th December 2012 CCV / Tyro / RTV Brickhill Anglian LRC & Chiltern Vale LRC
 
Last edited:
Treasure hunt at Roundhill woods and slab will be a similar lay out to Burnham I believe.

I will double check after xmas.
 
Last edited:
What still needs to be done Ryder?
Maybe we can organise a day were a few turn up and get stuck in!!
All I will want in return is a supply of TEA.
 
Ryder,

Whats left to do?

fit tranny input seal, attach boxes and fit gearbox?

Are you sure the rear crank is 100% perrrfect as that would be a PITA if its not sealing correctly.
 
Oh just a new one then Std or disco/RRC type?

I will change mine to the later disco one when one comes up at the right price. will mean i need a new front hd arm and steering damper relocation kit aka a a exhaust clamp.
 
Hii Jai...and Sible..... thanks for the offers... may take you up on those...

Rear Crak seal is brand new and as far as I can tell is super fine. Kai fitted it but was very careful and the flywheel housing was off the vehicle. He says that it went on without a problem and there was no puckering around the edges that might indicate a faulty fitting....

So....

New input seal on the xfer box (bought two just in case)... then refit transfer box n gearbox.... props and so on.

Swivel seals both sides and for the sake of thoroughness replace the top and bottom bearings

Weld a sheet of metal in the boot


Weld new B post bottoms

Weld Two new sills into place (got them in the garage)

Then see what the MOT man has to say!

Quite a bit.... but we have drive and motivation... well we have a drive anyway! lol
 
Ok, Paddocks also sell drop arms minus ball joint kit aswell as ones with a new ball joint I think its about £40 quid without joint and £55 with or sumthing like that anyhow unless they have dropped the price recently. If your old one has a little play in the ball joint and the splines are defo good let me know how much you want for it or if there is owt defenderish you want for it. I'm starting to refurb stuff my new years resoloution is to have plenty of refurbished stuff here wrapped up ready to use.
 
Ok, Paddocks also sell drop arms minus ball joint kit aswell as ones with a new ball joint I think its about £40 quid without joint and £55 with or sumthing like that anyhow unless they have dropped the price recently. If your old one has a little play in the ball joint and the splines are defo good let me know how much you want for it or if there is owt defenderish you want for it. I'm starting to refurb stuff my new years resoloution is to have plenty of refurbished stuff here wrapped up ready to use.
YOu know what Jai... that is an idea that makes really good sense!
 
Ryder might be best to leave it complete but put it on super skinny 16 inch tyres or see if you can get away with semi flat 205's.
 
Well Mid Feb should have Plenty and i mean plenty of Radius arms ready bushed and ready to fit. Slowly collecting panard rods and straight track rods all will be cleaned up painted fitted with new parts and wrapped up until they are needed. I have X ammount of hub assemblies almost wrapped up and plenty of good used diffs 3.5 and 4.7 all wrapped up.

Slowly getting to a point where I can box them all up ready for when I need them. Still got the series to get done ASAP because next years nationals is coming up FAST and It needs to be driving and tested at least by April ideally.
 
Back
Top