Hertfordshire Lanes?????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jcuk said:
My brakes are getting really bad - I can very nearly get the pedal to the floor now - so I wont be coming tomorrow :mad:
Click to expand...

From what you said in the pub, problem is either slave or master cylinder or both.
I changed both in the end to sort mine. Perfect since.
 
Spyderman said:
From what you said in the pub, problem is either slave or master cylinder or both.
I changed both in the end to sort mine. Perfect since.
Click to expand...

The problem is defiantly in the back somewhere. If I clamp the flexi hose to the back axle then the pedal is rock hard, so something is going back there. The garage have had it on the power bleeder so I don't think there is any air in there. There is no sign of weeping from the slaves. Ho hum, the delights of series ownership..
I might get chance to take another look tomorrow.
 
jcuk said:
The problem is defiantly in the back somewhere. If I clamp the flexi hose to the back axle then the pedal is rock hard, so something is going back there. The garage have had it on the power bleeder so I don't think there is any air in there. There is no sign of weeping from the slaves. Ho hum, the delights of series ownership..
I might get chance to take another look tomorrow.
Click to expand...

Is the hose in good condition, if it's weakened it'll stretch and absorb the pressure.
 
Bedtime for me, taking the Mrs. to GTW at 5:00, she's off to Tenerife for 3 days.
See all that's coming in the morning at baldock.
 
Have a great day tomorrow guys! Sorry I can't make it... but once the landy is done I will be there immediately (of course there is the chance that all the lanes will be shut by then!)

I think I have decided to try to patch all the little bits of the floor that are fubarred... I know it is a lot but the fact isthat I already have shedloads of steel and an abundance of time - since I plan to either chequerplate over the flor or panel it with ply then even of the patches are not brilliant it should not make a lot of difference to the overall result.

Finished off the rear cross member where the rear bumper bolts on, with another patch and a lick of paint today - Looks pretty good and will be pumping waxoil into the rear section of the chassis over the next day or two... on to the floor tomorrow then!

We live and learn eh!
 
Have fun guys, and look out for my snorkel, which may or may not be hanging from a low hung tree... :D

Remember when we were talking about superyachts, found a good one...

tits.jpg
 
Ref **** brakes 109.

If the brake pedal is rock hard and high when the rear flexi hose is clamped then you have 2 possible issues.

1. Air in the system at the back axle.
2. Poorly adjusted rear brakes.

Solution is to jack up both rear wheels and then use the brake adjusters (snail cams) to lock both shoes solid and do that both sides.

Now try the pedal without the clamp.

If the pedal is hard now then it is simply an adjustment issues. Simply re adjust the brakes properly.

If the pedal is still long/soft then it is a air in the system issue.

If the brakes refuse to bleed properly then you should strip down the brakes and check the rear wheel cylinders for brake fuid leaks. if they are leaking it is likely they are drawing air in as well as letting fluid out.

but those are your two basic issues.
 
You must log in or register to reply here.

Similar threads

A
Hampshire Green Lane Trip 11th August.
2
Replies
26
Views
2K
Anaconda
A
G
Top 100 green lanes
2 3
Replies
46
Views
4K
Freddie17
Freddie17
A
Peak District lanes
Replies
8
Views
2K
Anaconda
A
ar1g3
P38A Looking for p38 parts in Kent area
Replies
13
Views
929
Datatek
Datatek
A
Non Scratchy Greenlane Trip Berkshire/Wiltshire
Replies
10
Views
3K
Anaconda
A
Back
Top