Hertfordshire Lanes?????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Saturday I'm doing the scrap run early doors 8.30 or 9 ish cos I need to make some room here too much crap!then when I return I wanna try and get to the bottom of my er speed wobble. All my polybush ****e is being taken off and replaced for Std bushes. My rear axle on take up and de accelaration Clonks like billio the radIus arm bushes are shagged out mabe and possibly the A frame a tad too. Fronts and panhard rod need doing but I have spare arms that I can press in and swap out as and when.
 
Anybody for Laning tomorrow?

Might as well enjoy the wet weather we've been having.

I can do until 3.00pm
 
Last edited:
Tomorrow

Saturday 09.30 Sainsburys Bedford A6 just north of Bedford before dual carriageway.

Santa Pod Lanes.

Finishing at 15.00 as I've got to be home by 16.00 as I'm teaching tomorrow night at Hemel.

Let me know if you're coming.
 
Hey Ash... just an update... waiting for the release bearing to be delivered... after which the gearbox should be in on the same day... maybe tuesday I hope. I'll drop the hoist back straight after unless you need it before!
 
Hey guys,

Thanks to Jai's no how (and his Hi-Lift) The springs are now on, second one was a piece of ****, shocks are on too. Hopefully everything will be ok although I need a new shock bolt on one of the sides as the thread is ummm not right.

I was slightly worried that the springs would be too bouncy as they are 4 leaf paras on the rear but they are fine. Now just need some proper wheels and tyres to fill the gaping hole in the arches!! What would you suggest??

Hopefully the fronts will be on and the paint done before the trip in july. Catch you guys soon

Jimbo
 
Now just need some proper wheels and tyres to fill the gaping hole in the arches!! What would you suggest??

These tyres www.vass.co.uk/treads.asp?TyreID={B162DEE9-ED8B-45C4-B051-AF763555804B}


on these rims www.vass.co.uk/specials.asp?TyreID={94992A8E-3C0E-462B-AEAE-7BA3B425FAB5}

Can't go wrong with Michelin radials on tubeless rims.
 
Actually Mr SpitfireMK1UK

I was going to ask whether it wuld be oK to bring kai down to your place to play with your bug manly welder sometime this week?
 
ow tis busy on ere!

Ryder just got ur txt bloody inbox was full typical. I spent this afternoon tidying the garden well all my tyres are in one place anyhow. Fitted my rear step after modifying it by removing the full width tube spacer and kin long bolt for 2 shorter spacers and 2 bolts either side so the new tow hitch can be put on.

Then hit the pub for the footie and a meal with Spitfiremk1uk and the folks. Now drinking home made Mardi Gras so slowly getting lashed! Woo!
 
Back
Top