Freelander 1 power fold mirrors

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dar ran Dar ran

Dar ran Dar ran

Well-Known Member
Posts
623
Location
Cumbria GB
Both mirrors have stopped folding in
Working fine until today ?
Questions
They still move up/down L/R so have power
What’s the practical way to find out what’s wrong ?
Are the on one fuse and is it common for both to fail at same time ?
thanks
 
Power fold is completely independent of all other mirror functions, all mirrors are power adjustable, but not all are power fold, so the system is independent.

Check the power fold ECU for corrosion, which can be found to the left of the glove box.
 
It’s not home at the min my mate as borrowed it till tomorrow so I have a look then
I hope it’s a simple fix
Is it Just one for both ?
thanks as always
 
My powerfold mirrors sometimes stop unfolding. When that happens I open the fuse box by drivers knee, tap the all fuses a couple of times and the mirrors start working again. I have never worked out why they stop working; it appears to be a totally random event. Just once ot twice I've had to turn the ignition on and off to kick the mirrors back into life, but generally tapping the fuses does the trick.
 
anydrive said:
My powerfold mirrors sometimes stop unfolding. When that happens I open the fuse box by drivers knee, tap the all fuses a couple of times and the mirrors start working again. I have never worked out why they stop working; it appears to be a totally random event. Just once ot twice I've had to turn the ignition on and off to kick the mirrors back into life, but generally tapping the fuses does the trick.
Click to expand...
Freelander the gift that keeps giving
When it fares up I have look
Thanks
 
The ECU for the powerfolds is very much like a relay tucked up in the wall next to / underneath the glove box. I wonder if over the years too many wet boots etc. in the footwell area might have just made the 'relay' connectors a bit tarnished, and they just need a wiggle and a clean to get a good connection going again. When you take it out you could check it has the 12v supply present.
 
Got a look this afternoon
Apparently they don’t work if you have it left or right of centre
Only when the switch is central will they fold ?
 
On ours the switch is dodgy. Pushing it down is supposed to fold them but often doesn't. If I twist it left and right a few times and then try again it seems to clear it. Once it has worked once it keeps working. I think that the switch contacts are worn out or oxidised.
 
You must log in or register to reply here.

Similar threads

K
Freelander 1 Freelander 1 problem. Jerks on idle. AND cuts power when high temp.
2
Replies
22
Views
970
Alteredtech
Alteredtech
P
Freelander 1 td4 filters
Replies
5
Views
969
puckywucky
P
V
2 amigos ABS and TC light L314 freelander 1 (not solved) (new)
Replies
10
Views
1K
Veslav
V
R
Driver Door & Driver Rear Issue
Replies
2
Views
669
Badger688
Badger688
r8hilbocus
Discovery 1 94 , no heaters, wipers, mirrors, windows
2
Replies
36
Views
2K
r8hilbocus
r8hilbocus
Back
Top