Freelander 1 Freelander 1 TD4 eml with exclamation mark appear 5 seconds when full throthle. PLEASE HELP!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi,

Don’t forget to purge the water separator.

For the connector is goes there :

IMG_6653.jpeg

You need to slide the metal clip between the fuel filter houssing and the fuel filter.

I only see half of the metal clip, certainly broken look for that part YPZ000010 for a replacement.

Also where did that car goes ? don’t like that dirty look should be cleaned, with dirt comes rust.
 
Last edited:
These cars are not well serviced, the propshaft should be checked, universal joint can have play, VCU bearing can have the rubber part split. The front diff support can have the rubber part split …

Front Whishbones rust, there is one small hole next to ball joint, if it’s clugged …

Also next to the fuel pump there is a small electric connector pluged to the fuel filter … certainly broken or not here.

Fuel pipes in the engine bay have certainly 20 years, check them carefully. If one split you’ll be in trouble.
You are so wright. This are my fuel pipes in the engine bay
 

Attachments

  • IMG20250129115011.jpg
    IMG20250129115011.jpg
    377.8 KB · Views: 17
They have been already replaced, but they put poor quality hoses, you should replace them better quality ones.

Just behind the injectors there is a filter that is never replaced LLJ500010
If you are talking about this filter, it's done. And you are wright again. It was a total mess that filter. It was not a filter anymore. Just mudddy oil.
 

Attachments

  • IMG_20250131_202614.jpg
    IMG_20250131_202614.jpg
    199.6 KB · Views: 8
That's the ground connection to the fuel filter. The male spade does rust off but it won't affect it working. It purely grounds the metal of the filter casing.

Also, the clip holding the fuel pipe onto the pump appears to have come unclipped and the pipe may come off and cause a fuel leak.
 
Also, the clip holding the fuel pipe onto the pump appears to have come unclipped and the pipe may come off and cause a fuel leak.
If that clip was undone certainly the pump was changed ? ( certainly the poblem we are looking for ), it was also rotated for and odd reason.
 
Back
Top