Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jongould said:
gallery_50342_21087_1775674884ac58d5b4eca9.jpg
Click to expand...

I reckon I could fit 2 of them in the back as mine is only a 2 seater.
 
discomark10 said:
ur best off gettin a smallish turbo so it will spool quick and give you fast power, a bigger turbo will create more lag but more power
Click to expand...

Trouble is with a smallish Turbo you will start to work outside it's efficiency zone higher in the revs and it will increase intake temps further and therefore loose power.

That's the beauty of a vnt turbo best of both worlds.

Jon if you want a t28 I have quite a few kicking around if you want one to mock up with but they all have nackered bearings but I think a t28 will be too big
 
mikeyt said:
Trouble is with a smallish Turbo you will start to work outside it's efficiency zone higher in the revs and it will increase intake temps further and therefore loose power.

That's the beauty of a vnt turbo best of both worlds.

Jon if you want a t28 I have quite a few kicking around if you want one to mock up with but they all have nackered bearings but I think a t28 will be too big
Click to expand...


Oh that would be blinding. I like the idea of a T28 as its watercooled as well so will help in keeping charge temps down as well, not sure if the T25 is still watercooled?
 
Mikey, that bolt arrived today it,s a 24mm do you have a 3/4drive 24mm socket if not i will get one. rest of bits turned up today aswell, none of them as cool as the bits you just had delivered.
 
wickford90 said:
Mikey, that bolt arrived today it,s a 24mm do you have a 3/4drive 24mm socket if not i will get one. rest of bits turned up today aswell, none of them as cool as the bits you just had delivered.
Click to expand...


Hi Geoff im still working on the torque wrench, its not his it the company he works for, and hes not giving me a straight answer on if i can borrow it. i dont wanna get him in trouble.

how does the damper look?

Brian S said:
Guy has removed his valve gear to find one pushrod broken in 2 and a couple slightly bent.
Click to expand...


Thats pretty much the standard result from a cambelt failure.......guides and valves should be ok im my experience due to the valves being square to the pistons so the force is directed straight up the valve stem and onto the weaker bits......pushrods and on a 300tdi the rockers.

Co-Pang-Yang said:
I too have a new box of new things:
92DCF0B2-C0AD-4ACA-B5AC-E41972CA8F3F-3369-000006451C344D37.jpg


Not very exciting things, but new things none the less.......
Click to expand...

that will keep ya busy for a little while when you attacking it?
 
mikeyt said:
Hi Geoff im still working on the torque wrench, its not his it the company he works for, and hes not giving me a straight answer on if i can borrow it. i dont wanna get him in trouble.
Click to expand...

If you need I have got a torque wrench, a small one and a big one...
 
mikeyt said:
that will keep ya busy for a little while when you attacking it?
Click to expand...

Should be done at work by 8am at the lastest in the morning (Saturday) plan on heading home grabbing a shower and going straight to the barn. Got a couple of patches to weld as well then gonna trailer it to Ash's after and he's gonna MOT and tax it for me next week.

Actually come to think of it Brian/Dan who has my trailer and can they please bring it back tomorrow?
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
6K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
8K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish
Back
Top