Breaking Discovery 1 300Tdi ES

Mudron · Dec 31, 2013

Yeah no problem im not in a rush. What do you want for them?

Brian S · Dec 31, 2013

Well the swivel assemblies I usually sell for £50 a side as there are a lot of expensive parts in them. If it's just the swivels and you are happy to dismantle the whole assembly and give me back the cv joints, stub axle and hub assembly then only £15 each.

Sorry but it's a lot of work and mess to dismantle and saves so much effort just to take them off the axle in 1 piece.

Brian S · Jan 6, 2014

mastersdave2 · Jan 7, 2014

after a turbo reasonably cheap missed 2 auctions on ebay that went for just over £50 each

Brian S · Jan 7, 2014

I have 2 turbos, both good with no smoking.

One is on a manifold that has one good stud, one broken stud and one missing stud. I attached the downpipe using one nut on the good stud and a bolt in the hole and it seemed ok. You could always replace the studs. I would accept £75 for that one.

The other is just as good and all studs are intact. I want £100 for that one.

Brian S · Jan 11, 2014

dazza123 · Jan 12, 2014

Hi how much for the complete lift kit including the radius arms

Brian S · Jan 12, 2014

Hi
Lift kit isn't available and I only have standard radius arms.

If your interested then radius arms are £20 for all 4

sergeantcookie · Jan 19, 2014

Dont suppose you have 3 seatbelt buckles for the rear seats (not dickies) do you?

Brian S · Jan 20, 2014

I know what you mean. I will have a look but I think they have gone already.

I know I had them out when I removed the floor months ago.

Will search tomorrow and let you know.

ben 84 · Jan 27, 2014

Hi pal,
Does the discovery have electric seats , if so are the switches in good condition and do you still have them? If so how much for both posted to Blackpool?
Many thanks Ben.

Russ81 · Jan 27, 2014

Does it have abs?

If so how much for the sensor wire that goes from the front to the the rear that the rear sensor plug into thanks

Brian S · Jan 27, 2014

If I can find it then £5 inc postage.

I know where it plugged into at the back, where is it plugged into up front?

Russ81 · Jan 27, 2014

Im not sure. I know it runs down passenger chassis rail. And when I was welding up the bulkhead I seen the conduit coming next to the front outrigger and goes in the engine bay somewhere.

axledeep in a V8 · Jan 27, 2014

Hi, have you got a drivers door, all working, colour and condition, within reason, does not matter too much.
Dave

Brian S · Jan 27, 2014

Russ81 said:
Im not sure. I know it runs down passenger chassis rail. And when I was welding up the bulkhead I seen the conduit coming next to the front outrigger and goes in the engine bay somewhere.

I'll have a look for it. I have ripped out the loom so it will be somewhere.

Brian S · Jan 27, 2014

axledeep in a V8 said:
Hi, have you got a drivers door, all working, colour and condition, within reason, does not matter too much.
Dave

I do have a door complete with glass and handle. Was all working. Panel not great with green laning scratches and a little crease where the check strap was broken.

All yours for £25 (excluding door card and speaker)

Russ81 · Jan 27, 2014

Brian S said:
I'll have a look for it. I have ripped out the loom so it will be somewhere.

Cheers Brian you'll be a life saver if you can find it.

Brian S · Jan 29, 2014

I found the wire but it had been cut in the engine bay.

I removed the loom to weigh it in so probably cut the wire at the time.

Sorry.

Russ81 · Jan 29, 2014

No problem. Don't suppose there is a part number on it somewhere?

Breaking Discovery 1 300Tdi ES

Active Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Active Member

Well-Known Member

New Member

Member

Well-Known Member

Member

New Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Similar threads