Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
By the way that is a complete head with all valves but you need to buy new bolts really
Breaking Discovery 1 300Tdi ES
- Thread starter Brian S
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
It does. All the bits are there but there are a few bits.
Controls on steering wheel
Ecu
Button
Vacuum unit on inner wing
Unit under jack near air box
Do you need it all?
It does. All the bits are there but there are a few bits.
Controls on steering wheel
Ecu
Button
Vacuum unit on inner wing
Unit under jack near air box
Do you need it all?
Yes I need everything .. How much posted..
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Just the hardware I presume as the wiring is part of the loom and that has been taken out.
Also I cannot guarantee it all works. It did at one time but although hrs light on the switch goes on it didnt maintain its speed. I always thought it might be the hoses but never changed them to check.
The steering wheel with airbag is heavy and as it's a good leather one will be the most expensive part.
As I cannot guarantee it then how does £40 sound + delivery.
I recon with the weight of the wheel delivery would be around £10
Also I cannot guarantee it all works. It did at one time but although hrs light on the switch goes on it didnt maintain its speed. I always thought it might be the hoses but never changed them to check.
The steering wheel with airbag is heavy and as it's a good leather one will be the most expensive part.
As I cannot guarantee it then how does £40 sound + delivery.
I recon with the weight of the wheel delivery would be around £10
mastersdave2
New Member
- Posts
- 86
- Location
- Birmingham
ok no worries out of my budget unfortunately, damn christmas always gets in the way
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Injectors with the 4th injector for EDC engines. £100 the set
Throttle position sensor for EDC engine. £50
Cylinder head cleaned and skimmed £150
Good turbo. £75
Cam cover with good fan bearing. £30
These are Landyzone prices as I know I can sell for more on eBay.
My last tps and a single injector were sold within hours at these prices on eBay.
Throttle position sensor for EDC engine. £50
Cylinder head cleaned and skimmed £150
Good turbo. £75
Cam cover with good fan bearing. £30
These are Landyzone prices as I know I can sell for more on eBay.
My last tps and a single injector were sold within hours at these prices on eBay.
andyfox2005
Active Member
- Posts
- 464
Interior carpets ? Posted
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Posted where?
They are muddy and need a good clean and the fronts are in 2 parts as I took out the sponge and cut them out to do some welding without removing the dash or heater matrix.
They did go back in without seeing the join though.
They are muddy and need a good clean and the fronts are in 2 parts as I took out the sponge and cut them out to do some welding without removing the dash or heater matrix.
They did go back in without seeing the join though.
andyfox2005
Active Member
- Posts
- 464
Chippenham wiltshire could you get pics ?
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
I wish I had seen this earlier. I was up the unit today where the front parts are and I have the rear floor, boot floor and rear arch parts here.
A good wet vac would get them back to usable condition.
Probably won't be back there till Friday at the earliest.
A good wet vac would get them back to usable condition.
Probably won't be back there till Friday at the earliest.
andyfox2005
Active Member
- Posts
- 464
Thats ok what about transfer box price ?
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Transfer box is not right.
Might be fixable but I will get £50 for it as it is.
Might be fixable but I will get £50 for it as it is.
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Bump.
Still got all engine parts and axles and front diff.
Still got all engine parts and axles and front diff.
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
I'm off to the unit today.
Have a list of bits to bring back and will post pictures later.
If anyone needs anything else then let me know and I will check back while I am there.
Have a list of bits to bring back and will post pictures later.
If anyone needs anything else then let me know and I will check back while I am there.
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
When you say roof bars do you mean the ones permanently fixed to the roof or the ones in the bag under the rear seat?
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Ok. They are in the barn and it's been raining torrentially all day so will go down and remove them on my next visit.
Bemmy
Active Member
- Posts
- 134
- Location
- Colchester
Brian,
what state are the swivel balls/joints in Brian Ie: any corrosion on the chrome plating?
How are you getting on with the shocks & springs?
what state are the swivel balls/joints in Brian Ie: any corrosion on the chrome plating?
How are you getting on with the shocks & springs?
Brian S
Well-Known Member
- Posts
- 2,886
- Location
- Braintree, Essex
Hi. The swivels look ok to me. Would you be wanting the whole thing to save dismantling?
The n/s wheel bearing has a tiny bit of play and may need nipping up only.
The suspension is still on the chassis I have not attempted that yet.
If you want to collect some bits send me a pm.
The n/s wheel bearing has a tiny bit of play and may need nipping up only.
The suspension is still on the chassis I have not attempted that yet.
If you want to collect some bits send me a pm.
Similar threads
