Breaking Discovery 1 300Tdi ES

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I would but I have a 200tdi and no abs :(

I bought a snorkel off a 300 abs car and if fits thru the wing near enough in the right place to fit a 200 air box. Just the pipe is a slightly different size
It doesnt matter that h 200 don't have abs it's only relevant for the 300 as the piping is different.
For some reason most people say the 300 snork won't fit a 200 but it seems a fairly straight for to me
 
So would it fit mine?


Sorry I missed that this one is a Southdown one. I was thinking about a safari one.
If as Brian says his fits into the standard 300 box in standard place it may not go straight on unless you use the 300 air box
Or just a thought if it's a flexi pipe may be able to re-work it to fit onto the 200 airbox?
 
It's a flexipipe and currently its set up for 300tdi auto with abs.

Would not be wanting to sell it for the sake of it as I might need it myself again if I change my mind about my current one. Would want at least £100 including the modified air box.
 
Anyone need any more bits before I start packing it all for the Newbury autojumble?

Main parts I could do with selling is front and rear 24 spline axles, front diff, all 4 hubs and steering box.

Would sell it as the rolling chassis without wheels for £200 Ono
 
Anyone need any more bits before I start packing it all for the Newbury autojumble?

Main parts I could do with selling is front and rear 24 spline axles, front diff, all 4 hubs and steering box.

Would sell it as the rolling chassis without wheels for £200 Ono

but then it wouldn't roll :confused:
 
Back
Top