Help! I currently cant get my bonnet open on my disco 4, when I pull the lever the drivers side releases and I can move the bonnet slightly, but it appears the near side catch is still engaged. I’ve tried the long screwdriver approach but no success. Any advice would be greatly appreciated, thanks
Bonnet unable to open
- Thread starter Big CWW
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 45,037
- Location
- East Dorset
Best of luck mate!
This happened to a mate of mine. It cost him a fair amount of money and I think the garage had to take a headlight out. But I'm not sure if it wasn't the other way around, i.e. the other side opened.
This happened to a mate of mine. It cost him a fair amount of money and I think the garage had to take a headlight out. But I'm not sure if it wasn't the other way around, i.e. the other side opened.
tyregeezer
Well-Known Member
- Posts
- 738
- Location
- Rural Norfolk
Can you lift the bonnet enough to get grill out?
Cable runs on inside of slam panel any access to outer leading to d/s good tug may do trick good luck, would replace it and cables
Cable runs on inside of slam panel any access to outer leading to d/s good tug may do trick good luck, would replace it and cables
Managed to get the grill of today, so now have a view of the catch, will try cable and potentially remove the latch tomorrow.
Many thanks
tyregeezer
Well-Known Member
- Posts
- 738
- Location
- Rural Norfolk
Nice one half way there, should be able to get cable between catches unclipped and get a good pull on it, while someone pulls lever
Similar threads
Disco 3 (LR3)
Discovery 3 front heated seats
