L322 2003 L322 Can’t open bonnet -battery flat
- Thread starter awkwardbob
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
awkwardbob
Well-Known Member
- Posts
- 583
- Location
- Glasgow
Ah ok, that makes more sense !
I’ve a 16mm cable terminated in a slim croc clip which can just get to the terminal on the side of the starter. (Which is a denso unit E2718P)
Will need to check if that is the permanent 12V or the feed from the solenoid !
I’ve a 16mm cable terminated in a slim croc clip which can just get to the terminal on the side of the starter. (Which is a denso unit E2718P)
Will need to check if that is the permanent 12V or the feed from the solenoid !
awkwardbob
Well-Known Member
- Posts
- 583
- Location
- Glasgow
Bugger… it looks like the terminal I can actually reach (on the side) might be the heavy duty negative.
I’ll need to look in Rave
I’ll need to look in Rave
awkwardbob
Well-Known Member
- Posts
- 583
- Location
- Glasgow
Ok, so the terminal I can access is the one in the side the others are inaccessible towards the front of the vehicle.
brianp38dse
Well-Known Member
- Posts
- 20,069
- Location
- heathrow
The whole starter body is the negative connection anything else is Positive +
awkwardbob
Well-Known Member
- Posts
- 583
- Location
- Glasgow
I thought that too, but why the heavy-duty connector on the side ?
