No worries and always happy to help
Must admit have had to extend my tool kit somewhat since owning the disco
Bankz's 110 Double Cab
- Thread starter bankz5152
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No worries and always happy to help
Must admit have had to extend my tool kit somewhat since owning the disco
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
love the see through hole in engine lol
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Since owning a landy my tools have expanded from one spanner to about 30 and at least half a garage full
Where all this stuff is guna go when i move out who knows
Since owning a landy my tools have expanded from one spanner to about 30 and at least half a garage full
Where all this stuff is guna go when i move out who knows
Ur not wrong there , thought I had a decent set when I had the hippo but soon realised I need to some real grown up tools, lol
Got some longer spanner and dumpy sockets , put an ordinary spanner in the pic as a comparison
Uj sockets also handy
Just make sure ur house has a nice garage and a post lift , not that I would ever wish to try and cadge to borrow it mind ,
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Bloody hell thats blown some!!!!!
Day off today so trying to get a lot done!
First up A Bar welded up
All welded up and ready for a lick of CIO basecoat. I had them weld in a bar at the rear too so I can choose to mount my lights where ever, also adds a little strength
Dropped off the landy for the AC to be checked/repaired depending on whats wrong with it.... Hope its an easy fix!!
Soon as I get it back straight onto fitting the slotted discs! Hopefully be done by 7pm
Day off today so trying to get a lot done!
First up A Bar welded up
All welded up and ready for a lick of CIO basecoat. I had them weld in a bar at the rear too so I can choose to mount my lights where ever, also adds a little strength
Dropped off the landy for the AC to be checked/repaired depending on whats wrong with it.... Hope its an easy fix!!
Soon as I get it back straight onto fitting the slotted discs! Hopefully be done by 7pm
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Bad news from the AC check. New condensor needed (no shock really as mines rotten) leaking heavily from both seals and missing 60% of the cores.
£350 supply and fit a new one aint bad at all imo!
£350 supply and fit a new one aint bad at all imo!
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
Bloody hell thats blown some!!!!!
Day off today so trying to get a lot done!
First up A Bar welded up
View attachment 154158
All welded up and ready for a lick of CIO basecoat. I had them weld in a bar at the rear too so I can choose to mount my lights where ever, also adds a little strength
View attachment 154159
Dropped off the landy for the AC to be checked/repaired depending on whats wrong with it.... Hope its an easy fix!!
Soon as I get it back straight onto fitting the slotted discs! Hopefully be done by 7pm
now that is tasty!
got me wanting a full bumper width one with a smaller one welded on top!
Ouch , bet I will also have to replace mine, are u getting an allisport
Condenser and new dryer for mine is £80
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Ouch , bet I will also have to replace mine, are u getting an allisport
Condenser and new dryer for mine is £80
Allisport dont make AC condensors as much as I ask them
Three coats of coarse FXLiner and its on!
Fitted with x2 M12s bolted through and will be fitted with x2 M10s and a rivnut (youd need very bendy child hands to get in there otherwise!) Should hold it enough.
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Got the slotted front discs fitted aswell, pretty basic job took about an hour per side.
Splitting the disc from the hub
Drifted on with my new rawhide hammer (for work actually but perfect for this!)
Good trick a mate taught me when torqueing up discs, makes it a very simple job. Added some high strength loctit for good measure.
Got rid of the awful "mud guards" all ive gound they do is trap ****, score the discs and make a god awful noise. Skip for them. Cleaned up the area a touch, also noticed a bit of play in the swivel bearings dropped two shims and all gone
Pretty ay
Protective layer gone, still look pretty
All in all rather succesful day! now for the damn annoying part...
New calipers
New discs
Two different sets of pads - Brembo & Ferrodo
New pad fitting kit
Special brake grease
THEY STILL SQUEAK!!
So im going to fit new rear pads and fitting kit and hope for the best. If not then i guess ill be driven insane
Splitting the disc from the hub
Drifted on with my new rawhide hammer (for work actually but perfect for this!)
Good trick a mate taught me when torqueing up discs, makes it a very simple job. Added some high strength loctit for good measure.
Got rid of the awful "mud guards" all ive gound they do is trap ****, score the discs and make a god awful noise. Skip for them. Cleaned up the area a touch, also noticed a bit of play in the swivel bearings
dropped two shims and all gone Pretty ay
Protective layer gone, still look pretty
All in all rather succesful day!
now for the damn annoying part...New calipers
New discs
Two different sets of pads - Brembo & Ferrodo
New pad fitting kit
Special brake grease
THEY STILL SQUEAK!!
So im going to fit new rear pads and fitting kit and hope for the best. If not then i guess ill be driven insane
Allisport dont make AC condensors as much as I ask them
Three coats of coarse FXLiner and its on!
View attachment 154213
View attachment 154214
View attachment 154215
View attachment 154216
Fitted with x2 M12s bolted through and will be fitted with x2 M10s and a rivnut (youd need very bendy child hands to get in there otherwise!) Should hold it enough.
It’s the heat u know, lol
allisport make the intercoolers don’t they, doh, lol
Thought because of urs being expensive it may of been a special one , as my ac condenser was only around £90
Bumper is Looking good by the way
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
So,
Did you put the discs on the right way for the slots to work?
Cheers
Did you put the discs on the right way for the slots to work?
Cheers
Got the slotted front discs fitted aswell, pretty basic job took about an hour per side.
Splitting the disc from the hub
View attachment 154217
Drifted on with my new rawhide hammer (for work actually but perfect for this!)
View attachment 154218
Good trick a mate taught me when torqueing up discs, makes it a very simple job. Added some high strength loctit for good measure.
View attachment 154219
Got rid of the awful "mud guards" all ive gound they do is trap ****, score the discs and make a god awful noise. Skip for them. Cleaned up the area a touch, also noticed a bit of play in the swivel bearings
View attachment 154220
Pretty ay
View attachment 154221
Protective layer gone, still look pretty
View attachment 154222
All in all rather succesful day!
New calipers
New discs
Two different sets of pads - Brembo & Ferrodo
New pad fitting kit
Special brake grease
THEY STILL SQUEAK!!
So im going to fit new rear pads and fitting kit and hope for the best. If not then i guess ill be driven insane
Hi mate
They should stop u and looks good mate , test is in the pudding so to speak ,
Have u tried ceramic brake grease , lol
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Do not forget to tighten this up....
Cheers
Cheers
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Yeah as far as I can tell, each disc was labelled left and right, took that to mean right is drivers side, left passenger side.
That is tight! lol it was loosened again after I found play in the swivels but I'll double check now! Thanks
Yes based of yours and others recommendations! I can only assume the rears are squeaking...
Reason I went for the slotted discs is the standard discs while 'fine' did have a few grooves in them and you could feel they where not at all flat. That plus 80% of my driving is on reasonable fast country lanes for around 80 miles a day in a near fully loaded landy so seemed like a sensible upgrade to me and not just bling.
I quite like the bumper too, its very close to what I was after just a little beefier, should look better with a few spots and the winch fitted. Which I hope to get for a decent price at Kelmarsh this weekend!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Make sure you have enough space to fit the lights and the winch, iirc we covered this before..
Will look better with the winch fitted. You going rope or wire?
Cheers
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
We have covered it. If I get the lights I want they should fit, though all suppliers are out and not restocking! I have however found the OE in China which will sell them direct shipped for the same price so thats fine by me. Though I will see if anyone has them at the show.
Plan was to fit 4, at "5 each and a little spacing they should fit fine.
As for winch my choice atm is the Winchmax "military" version. IP68 (apparently) plasma rope, wireless, fairlead and a bag of goodies £429 usually again hopefully a show discount
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
All bolts where tight! Thanks for spotting it!
bankz5152
Well-Known Member
- Posts
- 9,310
- Location
- South London/North Kent
Ready for Kelmarsh! Early but busy af.
