Search results

messaged you :)

I'm looking for a waterproof action cam, mainly for when I go snorkelling next year, but might as well get one that I can use with the landy. Seen them from £25 to £250 Obviously being a tight yorkshireman id like to spend as little as possible, but I do want it to give at least half decent...

if its rolling, and only 1/2 a ton, handwinch and a shackle onto the top bar of the hitch

No idea if this is still running, or not, semi thread resurrection, but come accross this blatent ID sale...

Really?? can you give me a link, I live near Leeds and not heard anything, cant find owt via google either... Theres been some suggestions and proposals banded about, but nothing concrete.

The cable will be fine, the fuse may not tho but you'll be safe to upgrade it if need be (cant find a curve for car fuses) Inrush is basically the "startup current" as just as flourescent lights have a higher current demand for a second or so till they light, so does LED, what many people dont...

Personally I'd uprate the cable too and use a 15A fuse, you may find a 10A fuse (IF the LEDs are actually running at the full 120W) doesnt last long, LEDs have a huge inrush current. EG a 7W fitting from Halers has an inrush of over 30A, 12V units are no different, the inrush is in the LED.

no, its not a UV pen, its clearly visable all the time, ill take a pic tomorrow, it looks just like a sharpie marker or similar, but they said the only way to remove it is to physically remove the paint as well, so sounds like it etches in. This was the event I went to (not many details on...

Ok, so everyone knows about window etching, but what about other parts? I've taken to punching the reg No into parts I'm fitting, anything that will be able to identify parts or my motor is good IMO. Earlier in the year the police near me were marking doors, bonnets etc with an etching marker...

echo as above, 14mm spanner will work, uj on the other side of the bolt.

Can I ask where you have seen this, dvla website still says 73...

My eggsauce is, how do we put it politely, knackered... Looking at swapping to a stainless system, but need one with a side exit, as ive already got a hole cut/side exit and i likes it :) I at least need a downpipe and straight thru middle, the last section will live a bit longer, but not...

The (P) is the park brake light The (!) is low fluid warning

changed the clutch yesterday, I'm broken today...

Lumens are better measure than Watts, but can still be skewed. A decent supplier will give you the lumens output of the lightbar itself, fully made, and properly tested. A not so decent one will give you the lumens of the LEDs used (multiplied by the number in the bar) Now, obviously there are...

Unfortunatly, this isnt the only motor gone round here, theres been a total of 4 in the last 2 weeks (Trying to get some details on the others) 2 private vehicles (this one and a double cab TD5 from crossgreen, LS21) and 2 farmers vehicles. All gone between midnight and 6 am.

Not looked much at the donor vehicle route yet, just at (think it was ashcroft) a company that offer a recon autobox and conversion bits for about 2Kish Tho if I could get one at the right price, a spare engine is never a bad thing to have :D

OK. it seems my knackered knee has reared its head and decided to stay. So, I'm looking at options for my fender to ease the clutch a bit. so far I've found 2 main options. Auto box conversion (£2K +) or redbooster (about £400) Ive also been looking at remote servos, and at £80ish for a 1.9:1...

GKN. Technically they have never been Hardy Spicer UJs. Hardy Spicer make driveline products, Propshafts being one, CV joints another, GKN make bearings, UJS etc. Hardy Spicer have always (or at lease for a VERY long time, used GKN UJS in their products. GKN and H/S have been partner companies...

Worryingly close to me. :( Otley , LS21