Search results

Many thanks ,can always count on a good response . Many thanks again Oh and by younger i meant younger registration ie later registrations have this or that modification

Sorted. Someone had replaced the hevac head unit with the wrong one. Once i put the correct hevac unit (for the year) it now works fine. Thanks to all

1999 manual diesel p 38 Just bought a 1999 diesel p 38. Ive got a younger 1996 diesel auto. Silly question is the 99 seems to have some sort of pump latched onto the camshaft at the front which my 96 doesnt ,any one enlighten me to what it is please? Like i said silly question

If i bridge the r 3 relay and the compressor runs for 20-30 minutes am i correct in thinking that as the current flows through the trinary switch ,after r3 relay, the gas pressure must be good as the a/c compressor doesnt cut out

no leaks that im aware of,they vacced the system out as so many new parts were fitted then held it at a vac pressure for 25 minutes with no change. Filled her up weight wise then i bridged the r3 relay out so they could finish it off so to speak so i imagine the pressure is good. Ive checked the...

1999 diesel manual Rangerover p 38 Struggling a bit with the aircon as follows New Condensor,expansion valve and new filter unit, Took it in and had the car regassed but the compressor wont cut in The hevac unit puts the chequebook sign up so ive read the fault from a nanocom unit which is...

1999 p 38 manual diesel 133,000 miles Digital hevac unit Hi all I'm struggling with my p 38 heater directional output. I cant seem to achieve the correct flow so to speak, when I press the up button it will direct the flow to the screen ok. When I press the button to the chest height button I...

p plate rr p 38 diesel auto 155,000 miles Hi all Last month I changed the seal and sleeve on the ole girl and hey ho suspension back working great again. ive donne about 1800 miles since then and the compressors playing up again ,so I tried wammers eas check and decided to strip the...

Update spent ages with a dremmel type tool with what I can only describe as a dentist drill attachment. Managed to widen the groove then using a long screwdriver collapse each half in then hey presto the clip began opening up. Carefully pulled it back then removed both pipes from the...

um, showing my ignorance now but what is the international rescue map please

hi all, I live in Newport gwent. Ive got a nanacom the small one so if anyone needs use of it let me know. not looking to charge but any contribution offered would go st.davids foundation,cancer care,similar to McMillan nurses in England. cheers oh its for a p 38 diesel

managed too cut a groove across it but still no go loads of plus gas an still a no go anyone have any ideas? can you buy the aluminium pipes and the aluminium retaining pipe clip?

Struggling a bit.Think the screw is jammed tight in there.Now I can see more,theres significant red trash around the pipes,I think its evaporated anti freeze,hence the screw being seized in there. Ive now undone the matrix retaining screws and can pull the matrix out a bit so can see more. Ive...

many thanks will update later,thank you again

1998 rangerover diesel automatic rhdrive hi all, trying to change the heater o rings on the heater inside the cabin. left he dash in and been working around everything so to speak. I'm now at the point of trying to undo the "pipe clip" which holds the steel pipes to the heater. Is it just the...

many thanks, I checked all the fittings I disturbed with warm soapy water but couldn't find anything bubbling but doid fiddle them about. left her overnight and hey presto still up this morning. many thanks. I changed both the rears they were originals by the date stamp,not bad for 150 k plus...

hi all, my 1998 p38 used to be fine overnight,then she started to sink on the back left overnight . I connected my air compressor to the back left and switched the tap off. over night she sank again. thinking it was air bags I changed both of them. overnight now.she sinks on both rear sides. Any...

Does one have to use new stretch type bolts when replacing the head gasket on a p 38 diesel 1995 or can one get away with reusing the old ones if cleaned off and torqued down all equal as tight as You Know What?

solved checked the obd connector as it ad been changed for a vw one. It checked through though all ok ,so I was stumped again went back to basics and started cheking fuses,low and behold the srs fuse wass missing!! Got exccited and turned te ignition on,the srs light was on but flashing. This...

data;ek just found a post off yurs to another member about the pin locations and colours so going to use that tomorrow,just thought I'd let you know to save you searching as I know your a busy sort after lad on here. just wish you were blonde beautiful and female,lol Big thank you Have to...