Search results

Simtek sell that connector - 2 Way Land Rover/Bmw Lighting Connector | Automotive Connectors | Simtek (Uk) Ltd .

As well as the Circuit Diagrams in RAVE, the Electrical Library gives a brief description of each circuit and has a page for each connector, showing its location and the wire colours in each cavity. Remember, that the diagram of each connector is of its 'face', i.e. - the front, rather than...

The Light Green/Orange trace wire is switched through the 'auxiliary circuits relay' (in the under-bonnet fuse box) by the ignition switch, only when the ignition switch is in Position II. .

Yep, that's the one (Rave01.iso) The NAS version of RAVE is interesting to look through (I'm quite sad :o) but, the wiring diagrams and electrical library are not a lot of use on UK TD5 vehicles (or UK V8 vehicles, come to that!), as the differences in specifications, are just too great. .

Wiring for the TD5 fuel pump/sender unit, is as follows - White/Purple - Fuel pump live, from fuel pump relay Black - Fuel pump earth Pink/Black - Fuel gauge sender to/from instrument pack Green/Black - Fuel gauge sender to/from instrument pack Where are you attempting to download RAVE...

Yes, that will work That Light Green/Orange wire is powered via the 'auxiliary circuits relay' on 1.5mm² cable, through the same 15A fuse as the head unit's ignition-switched supply (F16 in the interior fuse box), so could be useful for something. What issues ? .

No, don't connect the driver's and passenger doors together, they're wired to different terminals on the BCU, and perform different functions. The 'driver's door open' function, does things like sound the 'lights on' warning, when the driver's door is opened (and the lights are on). The 'other...

The micro-switches in the door locks, switch the signal wire from the BCU to earth when a door is opened. As Peter has said, the driver's door is on a separate circuit to the other doors, which are all in parallel, on the same circuit. So, you can just leave the rear side and tail door...

That will be the Light Green/Orange trace wire, which goes from C0485/C0480 in the LH footwell, to the radio aerial amplifier, mounted up in the RH side of the roof. .

That connector is a 'jumper' to complete the rear fog lamp circuit to the towing electrics pickup connector. There's an optional relay that plugs-in at that connector (the 'jumper' is removed and disgarded), which cuts-out the vehicle's rear fog lamps when a trailer is connected to the towing...

Microcat - Spare parts Land Rover catalogue in English .

Sadly, that website has been gone for a while :( The article on central locking was very good; so, when I first saw it, I 'dumped' it into a Word document. If you PM me your email address, I'll send you a copy of it. .

The cable route from the fuse box up to the dash is very tight with just the factory harness, once you start adding cables it becomes impossible. You could run an RCA/Phono cable without a connector and, once it's through, solder on the connector. .

I've had no problems charging the battery this way. I've used it when my D2 has been parked-up for too long and the battery has gone flat and, when I can get my D2 on my drive, to keep the battery topped-up. You have to use a smart battery charger (such as the CTEK), which is OK to charge the...

If you've got a 12S supplementary towing electrics socket fitted, you can plug a battery charger into this socket to put some charge into the battery. I made up an adaptor to connect my CTEK battery charger to my 12S socket - Mine is wired - Positive to pin 4 Earth to pin 3 .

There's no power at the switch (other than the illumination on pin 2). The switch makes a momentary path to earth, to signal the BCU to switch on the heated windscreen for the timed period. The BCU does this by switching the heated windscreen relay's coil to earth. So, you will have power at...

The roof was changed from external ribs to internal ribs on the 1989 Model Year - so, from late 1988 onwards. My 'G' Reg. 110 Hardtop, which I bought new in October 1989, has an internally ribbed roof. They changed back to small external ribs, at some point during TD5 production. .

It's the "Tool Curtain", fitted to hide the bulkhead mounted toolkit - Land Rover parts Part number = MXC6321PMA - £143.69 inc VAT :eek: Tool Curtain - Centre Bulkhead - Genuine Land Rover at www.rimmerbros.co.uk .

If you're going to replace it, make sure you use the updated version - MGM000010K Gasket Kit - Heater Assembly - Genuine Land Rover at www.rimmerbros.co.uk There's a write-up on fitting it, here - TB Heater Repair - LAND ROVER CLUB V.I. .

Cruise Control - Master On/Off .