Search results

Thought that pipe pushed into the hole so it was its own grommet?

Hot water & a few dissolved dishwasher tablets.

Nice trip round my old area of lenham today. Spotted the pilgrims way had a few restrictions(a20 up towards faversham road) Then spotted another lane looks a bit overgrown. No time to stop as was working and the last sign I saw was “ not for long vehicals” & the queue behind me was getting...

Better to chop the paint off the steps than take paint off the bodywork Not seen a loom in that plastic wrap before. Did the change this on TD5?

As long as they are not shiny with polish to cover any cracks. If you start at 50 you can always go up a bit…

I thought that when I posted it… it’s the fence behind the motors which looks like a tow rope. I trust my spannering & don’t carry a rope ;)

Easier to get truck cab canvas. If you are going to build from an 86… Put on sides & trim the excess off the area by the door.move any of the edges and brackets back to suit. Roof.. attach to the front windscreen and remove the excess above the rear door. Replace the door/end And 107 truck...

Bit like the old VW beetles… used to use the heat of the engine,all good till exhaust gasses get in or the sills got rusty & the heat escapes. No heater in the S1 truck cab. Just fit a radiator muff.heat from the engine keeps you really warm.turn on the electric fan for extra heat if needed...

Welcome… Was that photo taken at either Avon dasset or oxted? You have owned some interesting motors

If no joy I will take some photos the weekend of my truck cab. Remind me Friday night ….

Cus you’re always in it?

Look behind your seals on the 90 and that’s the design needed.they look like angle iron just pop rivited into place

I thought the roofs were the same… Thought the only difference would be the extra lips for the door seals

Quick re look again at the video. That top pulley has a shiny front edge. May be the bracket under the water pipes is rubbing ?

Take the aux belt off & try again

That’s a water trap area. Re plate & put a big drain hole in

Now imagine driving down the road, that jet that went over the roof will probally hit the screen. Try before lowering. Adjuster the jets are either pin in hole & move or small screwdriver in slot and rotate

Press harder..;) You have the biggest standard brakes on the rear. You should have the same size on the front some people change the pads for a different compound Have noticed the rear anti roll bar is missing on the axle.

Another thought. Any cutting of the back body should be done at the front. This way the all the body fixings stay the same at the rear and the wheel arch is in the correct place. If you measure 10 inches this would give you workable room for the extension. Or if you can find 1 this...

Used to be if you had a 110 5 door these were v8. The Hicap was a work horse abused by farmers & used the hard engine 2.5. These were reliable. Change the transfer box they went quicker