aiming / adjusting wiper jets

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

sprie

Active Member
Posts
218
I have installed new jets from paddocks, new 4mm tubing from Emberton, and am using the pump that was on the vehicle.
First time i tested it (in the garage), the water went over the top of the vehicle and none of the windscreen.
Having had a look at the jets, i can't see how i can change their aim. The pump is obviously running well, but it is not new.
Is there anything i can do to change the aim, or do i need to reduce the pressure somehow that gets to the nozzles/jets?
 
Now imagine driving down the road, that jet that went over the roof will probally hit the screen. Try before lowering.

Adjuster the jets are either pin in hole & move or small screwdriver in slot and rotate
 
You must log in or register to reply here.

Similar threads

S
Windscreen Wiper switch question
Replies
4
Views
592
TS2304
TS2304
Keith_L
Disco 2 Are the windscreen washer jets adjustable?
Replies
7
Views
1K
backinblack
backinblack
S
replacement bulkhead
2
Replies
37
Views
4K
Steg750
S
Musher3
Upside down wipers!
Replies
11
Views
545
Musher3
Musher3
T
Water Pump / Cam Belt
Replies
3
Views
429
Telluride08
T
Back
Top