ok so i have a copy of impa that im using, everything is in english until it comes to the faults which are in german is there a copy were they are in english?
 
i guess i need to buy some airline and make an adapter then
is it standard 6mm air line? i must be able to attach a schrader valve to that
 
Just read, you need an airline adapter to inflate the bag to 5 bar while off the car to seat the bag onto the o rings!! Crikey.
Is this really needed? Seen people do it on YouTube etc with no mention
We just used a tyre valve with the 'mushroom' pushed against the air inlet and a standard tyre inflator, it helps if you put some red rubber grease on the O rings, its only the lower ones that need seating.
 
Would never have considered that! Voss connection is the electrical bit in the top?
Assume that would mean a new unit? The bag is past it's best but doesn't seem to be leaking. Assume it's original to the car

Voss connection is where the airline goes in.
 
Do you get it if you drive over a speed hump with both wheels going over together or only when driven over obliquely?
ETA - do you have active or passive anti-roll bars?
Went over one of those rubber speed strips today, it clunked. If that makes a difference.
Also noticed (with the window down) a squeak/scrape when i turn the wheel left or right while moving. Not when stationary. Assume that's a rubber bush somewhere
 

Similar threads