Dr_evil · Apr 22, 2013

Could you fit a towing cam or something along those lines ?

That new V8 I fitted was out of an auto and when I asked the local guys they said that should have a towing cam to provide more low end grunt cos of the auto box or something along those lines ?

discomark10 · Apr 22, 2013

Whats a towing cam? Just a type of profile? Probly dont help if you shortended the trumpets!

Dr_evil · Apr 22, 2013

essentially a cam designed to give low end torque

torque max

RPi Engineering - V8 Engine and Component List

discomark10 · Apr 25, 2013

The "Tuning MS V8 for Economy" Thread - MS-Megasquirt/Jolt - LR4x4 - The Land Rover Forum

Mr Noisy · Apr 25, 2013

Mr Noisy · Apr 27, 2013

LRO photoshoot planned for July

discomark10 · Apr 27, 2013

Mr Noisy said:
LRO photoshoot planned for July

Nice!! where is it going to be done?

MPfive · Apr 27, 2013

Spot on well done,should be a good issue

Mr Noisy · Apr 27, 2013

Parkwood

discodrivercumbria · Apr 27, 2013

Mr Noisy said:
LRO photoshoot planned for July

you'l have to get polish out again!! lol

cptbeefheart · Apr 27, 2013

god damn mamma u put it down baby put it down,hats off to ya awesome just awesome

cpt

Mr Noisy · Apr 28, 2013

discodrivercumbria said:
you'l have to get polish out again!! lol

Yep it'll get all bitched up for the shoot, properly gay I know

Mr Noisy · Apr 28, 2013

cptbeefheart said:
god damn mamma u put it down baby put it down,hats off to ya awesome just awesome

cpt

Nice one pal, I've dedicated my life to this car for the last few years but at least it shows

auf_wiedersehen_pet · Apr 28, 2013

Mr Noisy said:
Yep it'll get all bitched up for the shoot, properly gay I know

I like gay.

Mr Noisy · Apr 28, 2013

We know!

Mr Noisy · May 1, 2013

Next up, I've bought a 1.4 transfer case to fit to the disco, as part of my quest for motorway economy the MS boffins have decided that my car is over geared.

It's a 22D suffix C unit and the plan, with help of the factory rebuild manual, is to strip it down and rebuild replacing any overly worn parts.

Not going to get carried away trying to make it like new, but it's the only component on my vehicle I haven't had any dealings with ever, mainly because its faultless!

Anyway so I decided to strip this one and see what's what.

Watch this space

Paul D · May 1, 2013

Mr Noisy said:
Next up, I've bought a 1.4 transfer case to fit to the disco, as part of my quest for motorway economy the MS boffins have decided that my car is over geared.

It's a 22D suffix C unit and the plan, with help of the factory rebuild manual, is to strip it down and rebuild replacing any overly worn parts.

Not going to get carried away trying to make it like new, but it's the only component on my vehicle I haven't had any dealings with ever, mainly because its faultless!

Anyway so I decided to strip this one and see what's what.

Watch this space

I've been toying with that idea for a while .. wondering if instead of swapping cases from Disco to Defender, if it's just a case of different shaft/gearset that can be changed and overhaul the thing at the same time ..

Can't seem to get a definitive answer and can't afford to fettle with it yet anyway ..

Mr Noisy · May 1, 2013

Intermediate gear set needs changing, but Ashcroft charge like 200 quid for the gear set, I just have 50 for this transfer box.

Gonna strip it down just for good measure but hopefully not find too much that needs replacing!!

Mr Noisy · May 3, 2013

So here's some transfer box:

Aaaaaand there's the rest:

discomark10 · May 4, 2013

now put it back together again

lol

Banned

Well-Known Member

Banned

Well-Known Member

Coming in your ears.

Coming in your ears.

Well-Known Member

Active Member

Coming in your ears.

Well-Known Member

New Member

Coming in your ears.

Coming in your ears.

Well-Known Member

Coming in your ears.

Coming in your ears.

Old, nackered 'n broke, but the Landy is fine . :)

Coming in your ears.

Coming in your ears.

Well-Known Member

Similar threads