Billy B

Well-Known Member

• Jul 25, 2013

• #261

Trying to get as much as possible done before the mot on Saturday

So I fitted the passenger door card and fittings

Got the roof lining,sun visors,rear view mirror and interior light in(what a **** of a job by yourself)

Will try to fit the drivers side tomorrow, if I get a chance to pick up the bit of locking mechanism I'm missing, oh and I insured it today anorl

 

Station House

Well-Known Member

• Jul 26, 2013

• #262

Looking great, and yes the rear view mirror is a sod to fit

 

N

noexitroad

Member

• Jul 26, 2013

• #263

Just read the whole post, really impressive but what part of "budget" project were you referring to??
Have you kept a tally of costs so far?

 

Billy B

Well-Known Member

• Jul 26, 2013

• #264

noexitroad said:

Just read the whole post, really impressive but what part of "budget" project were you referring to??
Have you kept a tally of costs so far?

Click to expand...

I've only replaced the unsalvageable parts, everything I could save/repair I have, it just happens there were a few surprise issues that I found as I went

I don't want to tally it up until I'm done

 

N

noexitroad

Member

• Jul 27, 2013

• #265

i have "refreshed" a stage 1 and i can tell you that you won't want to add it up, it will scare you!!!
good to see another 90 defender brought up to scratch, they are very scarce down under.
all the best and thanks for an informative thread

 

Brian S

Well-Known Member

• Jul 27, 2013

• #266

You would give that Ed China off wheeler dealers a run for his money.

The finished job looks better than I thought it would.

Great inspiration.

 

Billy B

Well-Known Member

• Jul 27, 2013

• #267

Thanks Brian

Took it for the mot this morning, bastard failed on emissions

Looks like i need to get the injectors service after all

 

cowasaki

Well-Known Member

• Jul 27, 2013

• #268

Billy B said:

Thanks Brian

Took it for the mot this morning, bastard failed on emissions

Looks like i need to get the injectors service after all

Click to expand...

Doh! Pass on everything else?

 

Billy B

Well-Known Member

• Jul 27, 2013

• #269

Yep no advisories, just emissions

 

mark-d

Well-Known Member

• Jul 27, 2013

• #270

emissions on a diesel? What exactly did it fail on?

 

G

gse1986

Active Member

• Jul 27, 2013

• #271

a few tips for diesel emissions:

take it for a good drive before hand to warm it up.
take air filter out (the inside bit, leave the box there)
apparently put some of the fuel additive in

I researched all this and these seemed to be the suggestions, as I was sure mine would fail on emissions....it didnt though so never had try any of this!

 

Billy B

Well-Known Member

• Jul 27, 2013

• #272

gse1986 said:

a few tips for diesel emissions:

take it for a good drive before hand to warm it up.
take air filter out (the inside bit, leave the box there)
apparently put some of the fuel additive in

I researched all this and these seemed to be the suggestions, as I was sure mine would fail on emissions....it didnt though so never had try any of this!

Click to expand...

Did all of that pre mot, hoped it would fix it

Took the injectors out this afternoon two of them seem to be dripping instead of spraying, apparently that's bad

 

G

gse1986

Active Member

• Jul 27, 2013

• #273

Billy B said:

Did all of that pre mot, hoped it would fix it

Took the injectors out this afternoon two of them seem to be dripping instead of spraying, apparently that's bad

Click to expand...

Yea, I think you can get them refurbed for not an awful amount.

At least it isn't as bad as this guy's emissions....

Conner's canal boat - YouTube

 

Billy B

Well-Known Member

• Jul 27, 2013

• #274

Fair point, it wasnt quite that bad

 

G

gse1986

Active Member

• Jul 28, 2013

• #275

a bit more youtubing, this looks quite interesting

How diesel fuel injector works? And how nozzle spray ??.flv - YouTube

by the video, doesn't seem that reconditioning would be too difficult, presuming you can get parts

 

Billy B

Well-Known Member

• Jul 30, 2013

• #276

Injectors reconditioned, wallet empty, ready for retest

 

cowasaki

Well-Known Member

• Jul 30, 2013

• #277

Good luck

 

stutab

Well-Known Member

• Jul 30, 2013

• #278

Billy B said:

Injectors reconditioned, wallet empty, ready for retest

Click to expand...

Best of luck with the retest. Will be fine I am sure.

 

JonnyP

Well-Known Member

• Jul 30, 2013

• #279

Billy B said:

Injectors reconditioned, wallet empty, ready for retest

Click to expand...

Good luck chap :0)

 

Billy B

Well-Known Member

• Aug 2, 2013

• #280

Fitted the injectors tonight

Took bastid ages to get the old copper washers out, one in particular was a swine

New injectors in

Ready for retest in the morning