Trying to get as much as possible done before the mot on Saturday

So I fitted the passenger door card and fittings
76FF1425-6744-4793-9A8C-870EB58C6735-969-000001E1F7AF852D_zps419e5280.jpg


Got the roof lining,sun visors,rear view mirror and interior light in(what a **** of a job by yourself)

7C2A848B-67DE-4699-9D73-508ABB9D1A27-969-000001E1FE4F241D_zpsbf89a69d.jpg


Will try to fit the drivers side tomorrow, if I get a chance to pick up the bit of locking mechanism I'm missing, oh and I insured it today anorl
 
Just read the whole post, really impressive but what part of "budget" project were you referring to??
Have you kept a tally of costs so far?
 
Just read the whole post, really impressive but what part of "budget" project were you referring to??
Have you kept a tally of costs so far?

I've only replaced the unsalvageable parts, everything I could save/repair I have, it just happens there were a few surprise issues that I found as I went

I don't want to tally it up until I'm done
 
i have "refreshed" a stage 1 and i can tell you that you won't want to add it up, it will scare you!!!
good to see another 90 defender brought up to scratch, they are very scarce down under.
all the best and thanks for an informative thread
 
You would give that Ed China off wheeler dealers a run for his money.

The finished job looks better than I thought it would.

Great inspiration. ;)
 
Thanks Brian

Took it for the mot this morning, bastard failed on emissions

Looks like i need to get the injectors service after all:(:(
 
a few tips for diesel emissions:

take it for a good drive before hand to warm it up.
take air filter out (the inside bit, leave the box there)
apparently put some of the fuel additive in

I researched all this and these seemed to be the suggestions, as I was sure mine would fail on emissions....it didnt though so never had try any of this!
 
a few tips for diesel emissions:

take it for a good drive before hand to warm it up.
take air filter out (the inside bit, leave the box there)
apparently put some of the fuel additive in

I researched all this and these seemed to be the suggestions, as I was sure mine would fail on emissions....it didnt though so never had try any of this!

Did all of that pre mot, hoped it would fix it

Took the injectors out this afternoon two of them seem to be dripping instead of spraying, apparently that's bad
 
Fitted the injectors tonight

ebb2eabac921c16f47d8e62b1503f937_zpse38792a2.jpg


Took bastid ages to get the old copper washers out, one in particular was a swine

4340508c5e41c76b44d05948e2e6a881_zps5b5e421c.jpg


New injectors in

d913b284cc2439bbf411c844ae52e063_zpsd9e85ba2.jpg


Ready for retest in the morning


d2e86cf89262400a96e72ca102e10345_zps06fde15e.jpg
 

Similar threads