Billy B

Well-Known Member

• Sep 28, 2013

• #321

I got the Valeo one, not over the top but the britpart one looked terrible

 

Dan_Trials

Well-Known Member

• Sep 28, 2013

• #322

discomark10 said:

Borg and beck are good!

Click to expand...

Billy B said:

I got the Valeo one, not over the top but the britpart one looked terrible

Click to expand...

Both seem about the same price, will keep them in mind when the time comes. Yeah I wouldn't fit Britpart on some thing that's such a pain to get at if/when it goes wrong!

 

Billy B

Well-Known Member

• Sep 29, 2013

• #323

I will give it a good run today and next weekend,and finally got the pics uploaded

Gearbox out

Fork was worn

Got the old clutch out and found out what the rattling noise was !

New clutch in

Took a pic of the disc off the disco, that was very close

 

discomark10

Well-Known Member

• Sep 29, 2013

• #324

blimey, what happened to that disc?

 

Billy B

Well-Known Member

• Sep 29, 2013

• #325

The calliper failed and the pad got pushed onto the disc, believe it or not the brakes worked fine and it didn't make a sound, only noticed because I decided it was time to check the pads

On the other side of the disc it's worn right through!!!!!

 

Billy B

Well-Known Member

• Jan 3, 2014

• #326

Been too busy to work on the 90 recently, but I want to build my own cubby box, anyone got any good pics?

 

aaronmorris

Head's a shed

• Jan 3, 2014

• #327

Billy B said:

Been too busy to work on the 90 recently, but I want to build my own cubby box, anyone got any good pics?

Click to expand...

You're not the only one billy, Hopefully it wont be too bad when I go back next week
As for a cubby box have a look in the "what have you done to your landie today" thread. Looks impressive to me

 

aaronmorris

Head's a shed

• Jan 3, 2014

• #328

Infact linky here
http://www.landyzone.co.uk/lz/2878746-post23114.html

 

Turboman

Mab An Gov

• Jan 3, 2014

• #329

Billy B said:

Been too busy to work on the 90 recently, but I want to build my own cubby box, anyone got any good pics?

Click to expand...

Yep, Ive been working harder on feeding and watering the shedloads of visitors than I do at work Don't have any great pics I can measure my cubby box if ya want

 

Billy B

Well-Known Member

• Jan 3, 2014

• #330

Cheers fellas, that cubby is spot on

Fixed the indicators again, poxy hazard switch again!!!!!!!!!!!

 

Billy B

Well-Known Member

• Apr 29, 2014

• #331

Found the mystery squeak that's been plaguing me, front prop seized and ujs had it, finally going to get it right before I work away for 3 months

 

xaby82

New Member

• Apr 30, 2014

• #332

Just read the whole thread from start to finish! Was moaning about getting out to give mine a service. You sir are an inspiration.

Top job!