Billy B
Well-Known Member
Started today by cleaning and painting a few more of the faded plastic fittings
Then I fitted the remaining door trims, which seemed to take forever
Suppose it helps if you've got the right size nuts and bolts
Then Gave my gear stick a quick rub and paint
My uncle is back from his holiday next week so hopefully he can show me how to refit the turbo
Then I fitted the remaining door trims, which seemed to take forever
Suppose it helps if you've got the right size nuts and bolts
Then Gave my gear stick a quick rub and paint
My uncle is back from his holiday next week so hopefully he can show me how to refit the turbo
Mseries3
Well-Known Member
I would recommend removing the sump and cleaning it as well. If the turbo has let go, there is a strong possibility of bits of metal floating around in there!
I would recommend -
A Oil and Filter Change
Sump Removed and Cleaned
Oil Strainer cleaned
Oh, and using a syringe or similar fill the turbo with oil before you fit it!
I would recommend -
A Oil and Filter Change
Sump Removed and Cleaned
Oil Strainer cleaned
Oh, and using a syringe or similar fill the turbo with oil before you fit it!
Billy B
Well-Known Member
Thanks boys
First job, sump off
Filled it with petrol for an hour, then cleaned all the sludge out. Cleaned the oil strainer and painted the outside
Refitted the sump and rubbed down the inside of the bonnet
Gave it a coat of paint, I know it silver but I'm running out of green and no one will see it
New turbo fitted after a bit of fiddling with the exhaust manifold
Radiator, header tank and fan blade back on
Several litres of top quality asda motor oil in and we are ready to try the engine( asda oil is only a temporary measure to try and clear out any of the old oil that's still in there) it was only £1.20 a litre
Turn the key. Nothing!!!!!!
Ok I'm a div, forgot to connect the earth from the battery on to the gearbox
Rectified my mistake
Turn key
Starter motors fooked
Off to the shops tomorrow, hope fully ready to roll by the end of next weekend:crazy_driver:
First job, sump off
Filled it with petrol for an hour, then cleaned all the sludge out. Cleaned the oil strainer and painted the outside
Refitted the sump and rubbed down the inside of the bonnet
Gave it a coat of paint, I know it silver but I'm running out of green and no one will see it
New turbo fitted after a bit of fiddling with the exhaust manifold
Radiator, header tank and fan blade back on
Several litres of top quality asda motor oil in and we are ready to try the engine( asda oil is only a temporary measure to try and clear out any of the old oil that's still in there) it was only £1.20 a litre
Turn the key. Nothing!!!!!!
Ok I'm a div, forgot to connect the earth from the battery on to the gearbox
Rectified my mistake
Turn key
Starter motors fooked
Off to the shops tomorrow, hope fully ready to roll by the end of next weekend:crazy_driver:
Turboman
Mab An Gov
Turbo looking good loving the red paint on the Exhaust, I was too lazy to paint that when I did mine. It will be a good test of the paint, that area gets really hot when worked hard
As stutab said, try and make sure the turbo feed pipe is full of clean oil before startup.
The rubber pipe between the turbo and manifold looks in really good nick, not so sure about the hose between the air filter and the turbo. If this hose collapses inside it really knacks the performance, and if bits come of it they will get sucked into the turbo
It will be a good test of the paint, that area gets really hot when worked hard As stutab said, try and make sure the turbo feed pipe is full of clean oil before startup.
The rubber pipe between the turbo and manifold looks in really good nick, not so sure about the hose between the air filter and the turbo. If this hose collapses inside it really knacks the performance, and if bits come of it they will get sucked into the turbo
Turboman
Mab An Gov
Evenin mate, bit nicer for working outside now inna?
Pirtek might be good, I got a new genuine one and it was arms and legs, even though the parts guy is really good to me.
sible88
New Member
Yes, people are being over carefull, they come with grease in for int start up anyway
Billy B
Well-Known Member
Right then Boys and girls I done loads today
Started by swapping the dodgy starter motor for the re con one
Then put the heater and water pipes back in and filled it up
The fitted the exhaust, had to make a new bracket as the old one was missing
Tried to start it but the battery was flat
Started by swapping the dodgy starter motor for the re con one
Then put the heater and water pipes back in and filled it up
The fitted the exhaust, had to make a new bracket as the old one was missing
Tried to start it but the battery was flat
Billy B
Well-Known Member
Bloody iPhone, pressed the wrong button, I haven't finished yet
Right, took the battery out of my uncles fiesta and she fires up in a spectacular cloud of black smoke, IT'S ALIVE!!!!!!!!!!
It was rattling a fair bit so we adjusted the fuel l
Pump which seemed to improve it
Fitted the front lights and some other bits, one of the head lights doesn't work but after the rest going well today I can live with that
Right, took the battery out of my uncles fiesta and she fires up in a spectacular cloud of black smoke, IT'S ALIVE!!!!!!!!!!
It was rattling a fair bit so we adjusted the fuel l
Pump which seemed to improve it
Fitted the front lights and some other bits, one of the head lights doesn't work but after the rest going well today I can live with that
Mustbemental
New Member
Getting close now mate!
Do you mind me asking what the total spend is so far?
Do you mind me asking what the total spend is so far?
Billy B
Well-Known Member
Ive got all the receipts in a folder and I will try to add it up later, if I was guessing I would say around £1000 but that's just parts and paint, labour would be in the millions
Ive got all the receipts in a folder and I will try to add it up later, if I was guessing I would say around £1000 but that's just parts and paint, labour would be in the millions
still cheaper labour than having a service at Land Rover dealer lol been checking this out for a while now and my hat goes off to you mate you have done an excellent job on this rebuild
Mustbemental
New Member
+1 on that!
And for around a grand you can't go wrong! Bet you can't wait to get her back on the road!
