Just to make you happy diagnostics. More than likely pressure switch fault. Switch has a few functions switches ABS pump on at low pressure, TC lamp off at minimum operating pressure and ABS pump off at full pressure.
Last edited:
Datatek
Well-Known Member
Apart from engines, your Nanocom will cover all systems on all vehicles.
ant.7
Active Member
update on this weekends struggles!
checked all supply to sensors all good.
checked all relays all good.
checked abs ecu all looks ok except there was no reading at pin 1 which could relate to earlier diagnostic fault (No voltage at ECU Pin 1 when ignition on), question is should there be a voltage at pin 1???
also checked the abs pump switch connector and it has 5 pins anyone got any diagrams for this or any way of checking the switch to see if its faulty?
thanks as always
tony
checked all supply to sensors all good.
checked all relays all good.
checked abs ecu all looks ok except there was no reading at pin 1 which could relate to earlier diagnostic fault (No voltage at ECU Pin 1 when ignition on), question is should there be a voltage at pin 1???
also checked the abs pump switch connector and it has 5 pins anyone got any diagrams for this or any way of checking the switch to see if its faulty?
thanks as always
tony
ant.7
Active Member
LANDROVER RANGE ROVER P38 EAS AIR SUSPENSION, ENGINE & GEARBOX DIAGNOSTICS | eBay
cant justify spending £400 on nanocom anyone know if these are any good? and will it read my abs faults?
cant justify spending £400 on nanocom anyone know if these are any good? and will it read my abs faults?
No. Looks like OBDII plus the free EAS software to me.
They are all in there. But whether you can get to petrol other systems going in through EDC or vice versa i don't know. You certainly can't get to petrol CC by going in through EDC it's not listed as an option.
Datatek
Well-Known Member
Sounds like it. Some one found a compatible part at a good price a while back.
It's a Wabco part same part is fitted to some Volvos, Saabs and Jags and maybe a few other makes of car. Contact Emmots see if they have one. Saab part number is 8994071. http://www.ebay.co.uk/sch/i.html?_f...Xsaab+8994071.TRS0&_nkw=saab+8994071&_sacat=0 Good luck.
Last edited:
mozz smith
Well-Known Member
hi , I have today after the usual top advice from my good friend wammers taken my car for diagnostic check , as I was on way down to caravan and heard a bad sound i.e brd brd brd rd from what I thought was underneath the car it happens when I put foot down on pedal to speed up a bit .then only repeats as I put foot down again ,,,,anyway as I said top man wammers pointed to abs sensors or sensor switch and after diagnostic test its the abs sensor switch !!!! under the bonnet so will await delivery of one . having read your thread I though this may help you .... my fault was identified on obd II now I know pete and simon quite well over at landranger at stockport and I think their diagnostic machine is a very very expensive piece of kit AUTO-LOGIC ,and you would have thought that it would have shown that it is the sensor switch ,very strange that one ???????? so a big thanks to my remedial guru wammers ,, as always on the ball !!!!!!! thanks pal ,,kind regards mozz
Last edited:
