Hello again everyone.
Back in trouble again. I know a few posts on my problem have come up before but I was unable to find a definitive answer.
I have a new permanent ABS and Traction control lights on. (2000 p38 DSE) I checked all the wires to the ABS ECU and all seems good. I put a second hand ABS module in and same issue. I got a friend to plug in a diagnostic computer and the the following faults appeared as seen attached. Anyone any idea how to resolve the issue.
Many thanks

If the front left abs sensor is not working then that's why you have the lights on.
You need to confirm it's really the front left as some diag report the wrong wheel

kermit_rr said:

If the front left abs sensor is not working then that's why you have the lights on.
You need to confirm it's really the front left as some diag report the wrong wheel

Click to expand...

+1 ^^^^^^^

Thanks to all. Finally got the problems solved. Front sensor was an aftermarket new one that didn’t work and ended up putting a Wabco second hand one in and worked. The other problem with the inlet valve open circuit was an internal failure of the abs servo and once replaced with a good second hand one all the lights went out. All back to normal for the moment . Thanks again.