This thread is clearly going to get expensive for me.
Worst tool you've ever bought?
- Thread starter lightning
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
This thread is clearly going to get expensive for me.
Sadly that is the way of tools, cheap crap will do most jobs, but some stuff you do need the decent gear, otherwise life is just one long struggle.
All my driveway work on our cars is done with cheapo tools, there are some halfords spanners, but most is no name stuff.
We’re all thinking the same!
Flossie
Well-Known Member
- Posts
- 11,068
- Location
- Shropshire
Aldi digital Vernier, gives a different measurement on the same thing by 1mm +.
Performance power(I think they were called) 125mm angle grinders from b&q, was around 18 yrs ago though. First one lasted 1/2hr before dying in a puff of smoke, took it back, replacement started smoking straight away, let it run for fun and it blew itself to bits.
Got me money back and got a DeWalt one for 3 times the price. That has just terminally died needing only 2 sets of brushes and one on/off switch in those 18yrs, lots of use too. Replaced it with a Makita, seems smoother and lighter than the DeWalt.
Performance power(I think they were called) 125mm angle grinders from b&q, was around 18 yrs ago though. First one lasted 1/2hr before dying in a puff of smoke, took it back, replacement started smoking straight away, let it run for fun and it blew itself to bits.
Got me money back and got a DeWalt one for 3 times the price. That has just terminally died needing only 2 sets of brushes and one on/off switch in those 18yrs, lots of use too. Replaced it with a Makita, seems smoother and lighter than the DeWalt.
Flossie
Well-Known Member
- Posts
- 11,068
- Location
- Shropshire
Oh, and a cheap Chinese chainsaw off eBay, stilh copy, never got it to run longer than a couple of mins, it would just stop for no reason. Fuel and spark still, it just wouldn't go again, put my shoulder out endlessly pulling the cord.new carb, coil, filter, plug, made no difference, got a husky now that starts everytime and runs faultless all day.
On the subject of engines, about twenty years ago l bought a little AL-KO petrol mower with a Tecumseh two stroke motor.
Every time l used it, the thing was a battle to get it going, with copious amounts of carburettor teat squeezing and messing about.
l eventually gave up and bought a Honda. Starts second pull even after six months sat in the garage over winter, now had it eighteen years and no issues at all, oil change every year is all it needs.
Every time l used it, the thing was a battle to get it going, with copious amounts of carburettor teat squeezing and messing about.
l eventually gave up and bought a Honda. Starts second pull even after six months sat in the garage over winter, now had it eighteen years and no issues at all, oil change every year is all it needs.
tyregeezer
Well-Known Member
- Posts
- 738
- Location
- Rural Norfolk
Cheap tdv6 timing set flywheel locking tool from evilbay too big for hole
tottot
Well-Known Member
- Posts
- 8,106
- Location
- west wales coast
Cheap hacksaw blades that were made of cheese, teeth were gone after a few strokes and there was I thinking this a good easy cutting blade to use before realising it was going nowhere.
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
I bought an al-ko lawnmower. I've had it 13 years without a fault. The deck has started to rot now but that's down to my non end of season cleaning ritual.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Amazing all this Al-ko talk. I've got one of these arriving tomorrow...have wanted a manual push cylinder mower for years and this should be fun for the upper lawn. They've come on in leaps and bounds over the past years. No more excessively heavy cylinder crates...
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
My moms best desert spoons were great tyre levers for my old push bike but terrible when I tried them on the tyres of my first bsa bantam
Col
Col
Hicap phill
Well-Known Member
- Posts
- 16,348
- Location
- Wiltshire
My sister had a turkey baster. I told the nephews that’s how they were conceived,of course this was said during Christmas dinner.(said quietly so they had to check with their mom)
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Same here. All the 3/4 drive Britool sockets and such stuff is stored at my unit, or in NBs shed to use on her Land Rover.
What I actually carry on the boat is all pretty crap, Rolson, Draper, and old spanners I bought for 50p on market tool stalls. Plus a few big Stilsons for undoing stuck stuff.
It is adequate for basic servicing, and I am not worried if I drop them in the cut, or someone nicks them off the boat.
tottot
Well-Known Member
- Posts
- 8,106
- Location
- west wales coast
Yea, rubbish tools for boats unless out of the water. I once watched my new adjustable head down to the bottom of the harbour. Went back at low tide but I recon the shiny spanner had attracted some ones attention.
There is a Snap-On 3/8” Flexi Ratchet with a 14mm socket attached to it, attracting fish somewhere on the Solent seabed off Browndown Battery - have the exact GPS mark but have never managed to snag it with a magnet! Cursed outboard chose a choppy sea to shake loose !Yea, rubbish tools for boats unless out of the water. I once watched my new adjustable head down to the bottom of the harbour. Went back at low tide but I recon the shiny spanner had attracted some ones attention.
Worst tool I ever bought was a set of Rolson ‘Ezy Out’ bolt extractors - utterly useless and made from Play-Doh….
Last edited:
That would have made me weep!
Yes, there's nothing "Easy" about them is there. Guaranteed to make the job harder.
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
A soldering iron from wickes that bent due to its own heat. On the first use.
JimS
Well-Known Member
- Posts
- 10,952
- Location
- Not far enough away from London
Rivet gun made out of Chinesium. That was fun.
