What needs doing on your Land Rover?
- Thread starter D90mitch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
Not much at the moment:
Front diff pinion seal (slight weep)
Service injectors (no issues but probably due for it)
Fix heater vent flap mechanism in lower dash
Front diff pinion seal (slight weep)
Service injectors (no issues but probably due for it)
Fix heater vent flap mechanism in lower dash
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Buy and fit
a rear brake pipe T piece
a rear flexi brake pipe not decided which one i need yet def or disco
a rear axle prop drive flang kit ( 4 bolt one )
a couple of copper brake pipes to the rear axle
ready for swapping the disco 300tdi rear axle over onto my 90 in a couple of weeks.
then buy and fit a plus 2" lift kit ( terraferma )
then in the new year buy and fit a recon'd gearbox with a 1.2 transferbox then later on in the new year buy a new galv chassis and start swapping everything over
a rear brake pipe T piece
a rear flexi brake pipe not decided which one i need yet def or disco
a rear axle prop drive flang kit ( 4 bolt one )
a couple of copper brake pipes to the rear axle
ready for swapping the disco 300tdi rear axle over onto my 90 in a couple of weeks.
then buy and fit a plus 2" lift kit ( terraferma )
then in the new year buy and fit a recon'd gearbox with a 1.2 transferbox then later on in the new year buy a new galv chassis and start swapping everything over
D90mitch
Well-Known Member
- Posts
- 2,419
Buy and fit
a rear brake pipe T piece
a rear flexi brake pipe not decided which one i need yet def or disco
a rear axle prop drive flang kit ( 4 bolt one )
a couple of copper brake pipes to the rear axle
ready for swapping the disco 300tdi rear axle over onto my 90 in a couple of weeks.
then buy and fit a plus 2" lift kit ( terraferma )
then in the new year buy and fit a recon'd gearbox with a 1.2 transferbox then later on in the new year buy a new galv chassis and start swapping everything over
I'd get 2" extended hoses then if you're lifting. That's what I've done as getting the lift put on tomorrow. It's in the local workshop back home having:
Springs + shocks
Extended brake lines
Timing belt
Tensioner
Water pump (might as well whilst it's all off)
91defender90
Member
- Posts
- 29
My defender needs prepping for its MOT next week, 50/50 whether it'll pass.
My series 2a needs prepping for selling, its time for it to go i think, got a new Glavo chassis with it, but just dont have the time :/
My series 2a needs prepping for selling, its time for it to go i think, got a new Glavo chassis with it, but just dont have the time :/
D90mitch
Well-Known Member
- Posts
- 2,419
Make sure yer fog light works, I keep forgetting to check it! The terminal on it often gets water and corrodes stopping it from working.
Buz
Active Member
- Posts
- 766
Nothing NEEDS doing but I've loads of stuff to do through choice
Replace headlights and rewire (already purchased)
But lights for light bar and wire (already have the bar)
Work out how to instal snorkel
Finish off soundproofing the inside
Finish putting dash back together
etc, etc, etc
Replace headlights and rewire (already purchased)
But lights for light bar and wire (already have the bar)
Work out how to instal snorkel
Finish off soundproofing the inside
Finish putting dash back together
etc, etc, etc
Similar threads
