What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Drove it to the scrappy and bought some lengths of exhaust. Spent a few hours chopping and welding and for the 1st time ever I now have a solid exhaust wiv a proper flexi an everyfink :)
 
Bought a turret ring .. just about to crawl under to check and grease the UJ's, props, 'other stuff' what might be falling off .. ;)

Will fit the ring tomorrow.
 
Fitted new Draglink on the Disco. Found the source of the low-speed wobble - bulge on inside of rear o/s tyre! 2 General Grabbers ordered.
Walked past 'Fender 4 times - so far :D
 
Well last night and early hours,whilst on duty i fitted

Reconditioned turbo, decat and manifold gasket fitted. Happy days!

Looks like one of the turbo mounting studs is cross threaded and the turbo at high end revs is very noisey and not in a good way! :violent:

Had such high hopes and now i,m getting a little ****ed wea my 110. The boys at MRM are chippy as f$ck, as 4 of my manifold bolts were so lose i could undo them by finger!.....off to the 300TDI forum.
 
Sat in it all day waiting to start work, little mild offroading that has the potential to turn extreme if the rain comes...
 
Know that feel :( I just did that earlier and dropped £150 but spent a good amount recently!


Check for yourself ;) its looking like a series again :D collecting me custom engine mounts tomorrow and a new stick welder so I can fabricate some stuff this weekend. Think I may move the engine forward a couple of inches so its right against the rad just so I can lengthen the rear prop shaft




http://www.landyzone.co.uk/lz/f6/series-king-cab-217688.html one of the posts towards the end of the thread has the new pics in it
 
Alstons not so far from me ;) mine should be ok in the mud haha although super short prop shaft may mean I'm gonna have to get creative with my axle mounts to push it back slightly

Will see how it goes once I get the mounts made up, but feel free to pop in for a drink if you're up here
 
Removed and blocked the vacuum advance and re timed to 14 btdc. Just need to order some new dizzy springs from real steel and should be well sorted.
Engine already runs so much better. Even the exhaust note is better
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
631
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
913
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
560
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
989
invisible999
I
Back
Top