What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
refitted transfer box. but not before dropping it and trapping me pinky in the ratchet strap I was using :Cry:
just gotta bolt everything up and refit seat box etc.
just gotta bolt everything up and refit seat box etc.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Been sorting my sankey trailer. Body off, standard electrics fitted and working, annoying bits cut off. Just got to build my bespoke body now
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
Cam belt done, timing fully reset, running sweeter than ever, im pretty chuffed, done 3 belts, this is the first ive got right!!
4hrs, didnt think that was bad for a first time, and that includes putting the gazebo up, tools out and tidying everything up afterwards.
Seems to smoke less now too when you floor it (now Ill tweak my pump a bit more now!!)
Just the cowl and fan to go back on later in the week when im convinced its all set up right.
4hrs, didnt think that was bad for a first time, and that includes putting the gazebo up, tools out and tidying everything up afterwards.
Seems to smoke less now too when you floor it
(now Ill tweak my pump a bit more now!!)Just the cowl and fan to go back on later in the week when im convinced its all set up right.
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
well done that man:clap2:Cam belt done, timing fully reset, running sweeter than ever, im pretty chuffed, done 3 belts, this is the first ive got right!!
4hrs, didnt think that was bad for a first time, and that includes putting the gazebo up, tools out and tidying everything up afterwards.
Seems to smoke less now too when you floor it
Just the cowl and fan to go back on later in the week when im convinced its all set up right.
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
the old one!!!
Last edited:
Soloby Rob
Banned
- Posts
- 7,714
- Location
- In a house, not far from somewhere
Cleaned it up a bit inside and tried to make it smell a bit less of my boy cos it's MOT tomorrow.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
From yesterday
mrshoopfish
Active Member
- Posts
- 320
- Location
- East Sussex
New brake calipers, welded up too many holes, new horn wired in.......strictly speaking the ole man did this, I just thumped the brake light to get it working.......Mot tomorrow also......fingers crossed
Mattrnsm
Member
- Posts
- 11
- Location
- bognor regis / helensburgh
Over the last week, ive cut out the boot floor to start cleaning up and painting with hammerite ready to replace with a nice shiny one at the weekend. Ive stripped and cleaned the handbrake replacing the expander, which had ceased and snapped the bit on the back for locking it against the drum off.
Today I got some copper pipe and remade all the brake hoses as most of them had corroded and snapped in various places, got all that back together and bled the brakes so i can now move it round to my mates for welding at the weekend.
Today I got some copper pipe and remade all the brake hoses as most of them had corroded and snapped in various places, got all that back together and bled the brakes so i can now move it round to my mates for welding at the weekend.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
just left mine and come in cos it fooking freezing and pitch black outside. Transfer box is back on props and handbrake etc all connected back up. seatbox is back in and drivers seat fitted. just gotta fit Transmission tunnel, floorplates, battery and passenger seat tomorrow, afterwork.
Just washed the crud off me hands and bugger does me pinkey hurt. It didn't like the washingup liquid and sawdust scrub, I do know
Just washed the crud off me hands and bugger does me pinkey hurt.
It didn't like the washingup liquid and sawdust scrub, I do know Attachments
mikescuba
Well-Known Member
- Posts
- 2,731
- Location
- France, Loire, Rhone Alpes
Checked oil, none used, cleaned the air filter with high air pressure. Refilled screen wash. That should do me now for a couple of months before I look under the bonnet again.
just left mine and come in cos it fooking freezing and pitch black outside. Transfer box is back on props and handbrake etc all connected back up. seatbox is back in and drivers seat fitted. just gotta fit Transmission tunnel, floorplates, battery and passenger seat tomorrow, afterwork.
Just washed the crud off me hands and bugger does me pinkey hurt.
Red - get yourself to A&E and have your nail pierced, it's instant relief. Presumably the t/box is ok?:scratching_chin:
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Fook that
when the whole finger has gone black then I might think about it. Aye it's fine. I managed to lock the ratchet strap wiv me little finger. Before it hit the floor. :Cry:
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Fook that
Aye it's fine. I managed to lock the ratchet strap wiv me little finger. Before it hit the floor. :Cry:
that finger needs putting somewhere warm and moist to take the pain away,will clean it up as well.
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
for that???????????? bucket of ice water........... whimps
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Did she moan much
