Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
top drive
Well-Known Member
- Posts
- 2,694
- Location
- Peoples republic of culter
Mash hammer to the top of the loose nut down the way ? The steering column isnt attached to the bulkhead no more
Tried a 3 leg puller anol and it wouldnt do it either
Tried a 3 leg puller anol and it wouldnt do it either
- Posts
- 44,865
- Location
- Hornchurch
went fording.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
- Posts
- 44,865
- Location
- Hornchurch
nope splashed about abit in rivers and broke me speedo. less than 800 miles on the clock. Land rovers int reliable.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
- Posts
- 44,865
- Location
- Hornchurch
dunno. it jumped about a bit then died,.then came back to life, then died then alive then dead and was alive when i parked it up so who knows....
ratty
I'm not special I'm limited edition
- Posts
- 34,277
sounds like it might be worth checking the drive mechanism.
- Posts
- 44,865
- Location
- Hornchurch
or shb can
ratty
I'm not special I'm limited edition
- Posts
- 34,277
- Posts
- 44,865
- Location
- Hornchurch
nope 62 plate 90.760 miles on the clock.and its broke.
Hitchhiker
New Member
- Posts
- 29
- Location
- Barnsley/Sheffield
That I will, 8am and I'll be on it!At least you will have good company and plenty of cake while we're doing it
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Finally got my brakes to work only been fooked for 3months no more breaking 1/2 a mile away lol.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Gearbox and clutch in......now what to do as I didn't bring my welder as its raining.......
May start to king cab it by removing the tub and cutting the bulkhead out
May start to king cab it by removing the tub and cutting the bulkhead out
shakerattlengroan
New Member
- Posts
- 198
Changed clutch fluid,old stuff was black and was slightly reluctant to disengage sometimes,got tempted to rip out radio in anticipation of replacing it,(with one that works).Then lost interest so went in for tea an cake.
.
Big Mat
Well-Known Member
- Posts
- 943
- Location
- King's Lynn, Norfolk
Stood at the window and looked at it, can't go out and work on the engine in this rain without the risk of filling the engine with water
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Just got a free fairey or delorto overdrive I think
gonna clean the crud off it later and find the makers mark but its a big one took me half a glass of blood and 4 hours to take out but worth it
gonna clean the crud off it later and find the makers mark but its a big one
took me half a glass of blood and 4 hours to take out but worth it
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
cleaned up Flywheel off BB's old 200tdi injun, & dressed the teeth as they is a bit worn
fitted flywheel to injun.
fitted noo spigot bush.
Fitted noo clutch
Fitted noo HD clutch fork and the fooking Pushrod, retaining clip snapped while I was fitting it fooking crap Britpart.
tried to refit gearbox. fooker wouldn't close up. Took it back out and discovered the friction plate had slipped
Realigned clutch with state of the art, long reach socket and insulating tape.
refitted gearbox and it went staright in.. Yeah
Fitted noo Slave cylinder. & bled clutch. all done and dusted Hopefully
fitted flywheel to injun.
fitted noo spigot bush.
Fitted noo clutch
Fitted noo HD clutch fork and the fooking Pushrod, retaining clip snapped while I was fitting it
fooking crap Britpart. tried to refit gearbox. fooker wouldn't close up.
Took it back out and discovered the friction plate had slipped Realigned clutch with state of the art, long reach socket and insulating tape.
refitted gearbox and it went staright in.. Yeah
Fitted noo Slave cylinder. & bled clutch. all done and dusted Hopefully
