Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
glensar
New Member
- Posts
- 6
- Location
- united kingdom ,leeds
just got my dizzy 300 back from work where shes been in paint shop,absloutley cracking job ,all those long nights/early mornings well worth it.now loads of time on me hands lol:beer2::beer2:
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
bolted the bulkhead to the door frame bottoms, then bolted the tub bulkhead to them, cut the cappings to size and placed them on top of it, fitted the screen using the hinged my cousing (the legend!!!!) gave me, stuck the truck cab on top to keep the rain out, re fitted the upper door hinges and realised i need new bottom ones, loosely fitted the seatbox in and placed the wings on to get an idea of what it will look like 
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
bolted the bulkhead to the door frame bottoms, then bolted the tub bulkhead to them, cut the cappings to size and placed them on top of it, fitted the screen using the hinged my cousing (the legend!!!!) gave me, stuck the truck cab on top to keep the rain out, re fitted the upper door hinges and realised i need new bottom ones, loosely fitted the seatbox in and placed the wings on to get an idea of what it will look like
:nopics:
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
see facebook as me phone wont upload to here
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
There ya go...
Attachments
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
Started welderising me rear crossmember onto me chassis......a big thanks to mr Foss for the info and to Mr Ratty for the measurements, got too late and too dark to carry on tonight but will get it finished in the morning
cinstone
New Member
- Posts
- 47
- Location
- Stourbridge
Finally got my windscreen washers working more or less correctly after the dealer had said they were fixed. Just goes to show how much they were tested afterwards!
Chris.
Chris.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
finished welding on the rear crossmember, gave it a couple of coats of anti-corrosion primer then a good coat of chassis black even if i do say so myself it looks the nuts
even if i do say so myself it looks the nuts 
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Well it looks like a line of peanuts anyway??
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
well your welcome to gone do it again if you can do better!
brockus
Active Member
- Posts
- 304
- Location
- Hull, England, UK
well over the weekend i have replaced all track rod ends and wire brushed the boot floor and panited it !! that should be ok now for a year or 2
just got to weld or fill the rear wheel arch
just got to weld or fill the rear wheel arch
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
fook all cause its raining
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
fook all cause its raining
Big gurl. S'dry unnerneath innit?
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
no most of the body is off so its even wetter under it than it is above it
SHEDJIM
Well-Known Member
- Posts
- 1,480
- Location
- Wherever I lay my hat.
My depender one looked like that don't think it needs a seal in there. Deffo needs a uj tho
- Posts
- 83,282
- Location
- Embasinga stocæ
Stick a cork in it
