What have you done to your Landie today.

the_wolf · Jan 23, 2013

lcbandit said:
broke it clutch gone and bullbars completely snapped off!!! oops

Lol how did you go and do that then?

lcbandit · Jan 23, 2013

bullbar was a bit dodgy anyway, crap weld fix on it and the vibrating i reckon killed it off, also my lad has been playing in the snow in it up holmfirth so god knows what he's been doing! lol, n clutch been playing up for a while thought it was maybe an airlock after putting new master cylinder on but looking like clutch fubard, he had to drive it home from holmfirth with no clutch, I am going to investigate tomorrow to make sure its not lost fluid n then take it from there.

mikescuba · Jan 23, 2013

Frostytel said:
What's the rear drive flange

Opps. Hub flange

BOOMER · Jan 23, 2013

Finally got round to fitting the spare set of 265/70 16 Grabber ATs to the rims, fitted the new bonnet release cable (after the lever broke up doing the oil change earlier this week) and greased/checked all round.
Just need to drain a little coolant and add some fresh OAT to strengthen the mixture up a little bit tomorrow and we're all set for Wales this weekend

lcbandit · Jan 24, 2013

Just taken the best part of 20 mins to get the feckin master cylinder lid off! Had to resort to getting hubby to do it in the end, n he even struggled with the bloody thing! Still have fluid in there but it has lost about a 1/4 of an inch so still assuming clutch has totally gone

Silverlandy · Jan 24, 2013

Washed it in the freezing cold with freezing cold water from the water butt...needless to say I missed bits.

stutab · Jan 24, 2013

Removed heater box, tunnel top and nearly all of the screws for the tunnel, then had to rescue the wife so packed up and went home!!

Pikey · Jan 24, 2013

emptied everything outta the back. bolted 2 sets of Waffle Boards & me hilift to the side of the seatboxes raised the bed by 2" and secured all me ammo boxes etc under the bed. to try and stop it all moving around this weekend. and refitted the bed. Needs a bit of fine tuning tomorrow morning.

SHORT ROUND · Jan 24, 2013

i changed/topped up all the fluids under the bonnet today and also changed both track rod ends.

Dewin · Jan 24, 2013

Fitted the new battery (which took less than 24hrs to be delivered

) and lo and behold she burst into life faster than she's ever done since I've owned her ... sadly I also found that there is a power drain of 0.15v, so will be playing with the fuses tomorrow to trace the problem :doh:

Pikey · Jan 24, 2013

Dewin said:
Fitted the new battery (which took less than 24hrs to be delivered ) and lo and behold she burst into life faster than she's ever done since I've owned her ... sadly I also found that there is a power drain of 0.15v, so will be playing with the fuses tomorrow to trace the problem :doh:

Try the clock first

the_wolf · Jan 25, 2013

Spent literally hours trying to unscrew the drag link before realising i was turning it the wrong way

jeez didnt i feel like a dick. On the plus side my steering is now fantastic

Grit Valve · Jan 25, 2013

the_wolf said:
Spent literally hours trying to unscrew the drag link before realising i was turning it the wrong way jeez didnt i feel like a dick. On the plus side my steering is now fantastic

Back to play school lefty loosey righty tighty

RobertOHare · Jan 25, 2013

Trying to fit a Cb radio

hateee trying to hide wires ! end up breaking somthin gettin it to come off !

a2dds · Jan 25, 2013

Topped her oil up, wiped some **** of the inside of windscreen, wiped the dash down so its nooice and shiny, as shiny as a 24 year old landy can be anyway

Ready for me trip up to london for the weekend

I found that when it was idling, gear box in neutral and clutch engaged there was an odd fain rattly noise coming from somewhere? It went when I disengaged the clutch. Any ideas what that could be? hope me gearbox isn't gonna start playing up. Could do with its oil checked and topped up, I haven't done it since i've owned it I suppose.

bigvinnie · Jan 25, 2013

Brought them both in from the cold.

Replaced some parts on the 90 for sale and sorted out headlight earth issue on the 110.

Now if only someone would buy the 90 i could buy new stuff fur the 110

gemsdad · Jan 25, 2013

bigvinnie said:
Brought them both in from the cold.

Replaced some parts on the 90 for sale and sorted out headlight earth issue on the 110.

Now if only someone would buy the 90 i could buy new stuff fur the 110

how much for the 90?? pics.

bigvinnie · Jan 25, 2013

gemsdad said:
how much for the 90?? pics.

The wee 90,s been on ebay this week, hopefully got someone comming up today/tommorrow for it.

Paid 3700 last october looking for around that maybe more, comes with a years mot and 6 months tax.

gemsdad · Jan 25, 2013

bigvinnie said:
The wee 90,s been on ebay this week, hopefully got someone comming up today/tommorrow for it.

Paid 3700 last october looking for around that maybe more, comes with a years mot and 6 months tax.

ok,was just wondering thats all,i got a td5 disco.but a 90 might be more suited for what i want.

bigvinnie · Jan 25, 2013

It was a wee project i bought and fixed some problems on it.

But circumstances change and i needed some bigger hence the 110 csw.

I,d keep the thing but its an expensive toy/hobby.

Hopefully get 4 grand. its what i,ve asked for off the lad, if he ever calls back!

What have you done to your Landie today.

Well-Known Member

Well-Known Member

Well-Known Member

Bloke from Dorset

Attachments

Well-Known Member

3.5efi's other half

Well-Known Member

Dummy Ejection Facilitator..

Attachments

Active Member

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

2000 4.6 Vouge

New Member

Active Member

Active Member

Attachments

NOT BOTHERED.

Active Member

NOT BOTHERED.

Active Member

Similar threads