What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The driver's door lock spacers popped out at Bologna airport!
And I couldn't get the effing door to shut. I tried driving down the motorway with one hand on the door but it was mega scary so I stopped and temporarily solved the problem thus
And drove home via the scenic route.
Have now sorted the door so it shuts again
And I couldn't get the effing door to shut. I tried driving down the motorway with one hand on the door but it was mega scary so I stopped and temporarily solved the problem thus
And drove home via the scenic route.
Have now sorted the door so it shuts again
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
The driver's door lock spacers popped out at Bologna airport!
View attachment 37536
And I couldn't get the effing door to shut. I tried driving down the motorway with one hand on the door but it was mega scary so I stopped and temporarily solved the problem thus
View attachment 37537
And drove home via the scenic route.
Have now sorted the door so it shuts again
way to go mandy.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
youz welcome anorl.my doris would have **** herself and just stood in the road feckin helpless.
baptista
Active Member
- Posts
- 678
- Location
- Lisbon, Portugal
Pic of the fitted led work lights
And the boxes they came in
Not bad for £10 each
Daz
please load-up a picture with them working, only £10!!! where???
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Have a look at one of my earlier posts on this thread - there is a link
(post 16823)
Daz
(post 16823)
Daz
Last edited:
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Fitted the HELLA rally type map light
My yellow/green/blue flip up switch covers arrived too
Daz
My yellow/green/blue flip up switch covers arrived too
Daz
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
The driver's door lock spacers popped out at Bologna airport!
View attachment 37536
And I couldn't get the effing door to shut. I tried driving down the motorway with one hand on the door but it was mega scary so I stopped and temporarily solved the problem thus
View attachment 37537
And drove home via the scenic route.
Have now sorted the door so it shuts again
Funnily enough we had an old LDV van we called Mandy that had to have the side door tied shut in a similar fashion!
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Swore at it, threw a spanner it, kicked it and come remarkably close to setting the b****rd thing on fire.Gearbox oil coolers and their associated pipes are work of the Devil, I tell thee!!
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Some bastid has stolen my clutch.....
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
bigvinnie
Active Member
- Posts
- 748
- Location
- Catterick North Yorkshire
Attempted to cut out the old bushes in the panhard rod.......smashed me knuckles, snapped 3 hacksaw blades, broke 1 drill bit...........and chucked ma teddy in the corner!
gonna find a local garage the morrow wea a press!
gonna find a local garage the morrow wea a press!
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Attempted to cut out the old bushes in the panhard rod.......smashed me knuckles, snapped 3 hacksaw blades, broke 1 drill bit...........and chucked ma teddy in the corner!
gonna find a local garage the morrow wea a press!
Burn em out
Daz
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
wussAttempted to cut out the old bushes in the panhard rod.......smashed me knuckles, snapped 3 hacksaw blades, broke 1 drill bit...........and chucked ma teddy in the corner!
gonna find a local garage the morrow wea a press!
Nice tight blades, get rid of snagging rubber and your on your way !
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
Took the rangie for an mot
2 track rod ends, 1 rack end
2 track rod ends, 1 rack end
bigvinnie
Active Member
- Posts
- 748
- Location
- Catterick North Yorkshire
Was using junior hacksaw like....left the proper one in work...that i,'ll learn me
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Was using junior hacksaw like....left the proper one in work...that i,'ll learn me
No wonder doh
- Posts
- 7,332
- Location
- Under my landy
Swore at it, threw a spanner it, kicked it and come remarkably close to setting the b****rd thing on fire.Gearbox oil coolers and their associated pipes are work of the Devil, I tell thee!!
Going that well huh Mark? Just shout if you need a hand
I actually made a start on getting the Series back on the road today
