What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Watched as some **** thought it didn't matter and leaned a roofrack full of Willow branches against it while she unloaded the rest .. till I told her to **** off and lean her ****e against her own car!!

The Head (I'm a school caretaker) had me in the office later and asked why I'd shouted and upset the 'Play Leader' .. she'd heard a different version, where the branches had 'accidentally slipped'.

The Play Leader also got a bit irate later when she had to leave .. I had somehow lost the Disco keys for a while, and somehow it had got parked so she could only just, not quite, get out ... ;)
 
dug up me driveway with a digger gonna borrow dads keys and use fuel to harden up the new one and compact all the soil and hardcore

Can we have a translation please?

If you've dug up the driveway what are you going to pour the fuel on?

What fuel are you going to be using?

You need to remove all the soil from the hardcore and then compact the ground, then lay Hardcore and compact that. then blind with sand and compact that Then lay the concrete or Tarmac or Blocks.

If using Blocks I suggest you also use a weed control fabric under the blocks. and then compact the blocks when once you've fully laid the drive.
 
Didn't do a lot tae mine the night as when a picked up me other loom ah found a wire come off from somewheres and spent ages tryin' tae suss where it come out off! Found it and then took the rest of the scotch locks off then soldered some and used the insulated crimps on others. Ah also rubbed back some dodgy bits on the panel that's got the front vent levers on and gave it a quick lick of paint ;):D
 
You are on drugs

hahaa i dint make that very clear

right ive broken up and dug up the driveway and cut the trees down and pulled there roots out, then filled and smoothed off the new one then borrowed dads keys to start his car and used up a load of his fuel driving over back and fourth lots of time to harden it up and compact the hardcore.
 
found where the leak in the drivers footwell is coming from an it looks like the fookin wings gotta come off to sort out a gap in the inner panel has let water in an is now starting to rust.
bastid land rovers!:banghead::banghead::banghead:

how big a job is it to take the outter wing off?
looks like if i take the plastic wheel arch liner out i'm gonna have more fookin welding to do:cuss:

so thats another weekend i can't go out laneing
 
if its the disco = piece of ****......
1) row of bolts along top of inner/outer wing joint.
2) row of bolts inside front of door, down A pillar.
3) 1 or 2 brackets at the bottom of the wing attaching to the headlight box and relay area in the footwell.


it then takes 7 :eek: months before can bolt it back :(
 
if its the disco = piece of ****......
1) row of bolts along top of inner/outer wing joint.
2) row of bolts inside front of door, down A pillar.
3) 1 or 2 brackets at the bottom of the wing attaching to the headlight box and relay area in the footwell.


it then takes 7 :eek: months before can bolt it back :(


oh cheers daft, was gonna whip it off tonight, but when i saw the sealant down the inside of the wing changed my mind:rolleyes:
will have a look at the weekend if the weather's any good.

oh an why 7 months to put it back together?:confused:
am i gonna find more work to do, or couldn't you be arsed?
 
went rabbit lamping tonight and put nearside rear wheel in a ditch :mad::doh: had to get me 2 friends to stand on the drivers side front bumper came out a treat :D
 
Back
Top