What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Whacked the new patriot rack on the top and tested out the new tent :) All dressed up and nowhere to go...

IMG_8639.jpg
 
meanwhile ive ordered spare parts for the 90 in case there is a need :( and once ive got some more toolkits I will try and grow a pair :pand join LZIR as I wanna give something back to the forums .take out put in is my motto well according to the mrs it is :D
 
After bringing the trailer to work for a friend to borrow, I realised my trailer hookup wasn't supplying the right voltage to the right tail/brake light. Brief inspection found the culprit... (a hack job...which I further hacked). A few new heat shrink solder thingies and a new wrap of tape, a bit better than before :)

Before
IMG_8729.jpg

After
IMG_8730.jpg


Whilst in cable mode, I also chopped off my ODB plug and replaced with a non-standard - every little helps!
 
I've been out tinkering with the Land Rover. I was looking for the source of a clunk on drive take-up. Of course, they often do this, but mine seemed to be getting a little louder and sharper. The propshaft joints all seemed to be OK, the wheel bearings likewise. There was a little movement between the drive shafts and drive flanges so I swapped the worst one for a slightly less bad one out of the shed. Otherwise it is hard to tell where it is coming from. The suspension bushes seem alright too.

Whilst i had got the tools out i changed my engine mounts. The TD5 engine can be jacked up just enough to get them out, apparently. This is true, as I found out today. It feels really weird jacking the engine so it stands up out of the car, but there is just enough flex in all the pipes and wires to allow this. Once the old ones were out I had to jack it up even more to get the new ones in because they weren't as flat as the old ones. Everything still seems to work when I tried it, so it looks like I've succeeded.
 
Got the rear door to open so I can actually use the boot through the door instead of lobbing everything over the back seats then having to climb in the back to retrieve any of it
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
626
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
905
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
549
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
986
invisible999
I
Back
Top