Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
re fitted drivers side interior and new sound proofing
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Was going to do body prep work but that's going out the window since its ****ing down.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Straightened, fitted, and painted the rear brake pipe T piece bracket, fitted a new T piece and painted the rear radius arms as the bushes ( pollybush ) are better looking than the ones fitted to mine ( rubber ) but will be replacing all bushes with a full polly bush kit when replacing the chassis early next year 
punkawallah
Member
- Posts
- 22
- Location
- Underneath me 110 having a snooze
Admired it from several angles as I creased me back hanging a damned shed door and can't play today.
Last edited:
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Gave 2nd coat chassis black to rear of bumper
brainslug
New Member
- Posts
- 5
- Location
- Gloucestershire
Fitted all new door lock barrels, fed up of being able to break into my own landy using a 5p piece. I may drive it like I stole it, but im hoping nobody else will.
mephitic
Active Member
- Posts
- 174
- Location
- Abruzzo, Italy
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Brake and clutch fluid change. Went round all the brakes with vacuum extractor and pulled all the old fluid through, followed by the fresh stuff. Them sucked about 300ml through the clutch system as well. I was assisted in this by Martyn110, who filled the reservoirs while I sucked the fluid through.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Nothing today as such, Just more shed sorting out.
But over the last week I've rebuild this lt77
Never done one before but went surprisingly well.
How it looked before I started.
[/URL][/IMG]
Casing cleaned.
[/URL][/IMG]
Epoxy primer. Bloody good be not the cheapest stuff.
[/URL][/IMG]
Painted in 2k satin black.
[/URL][/IMG]
New bearings, Baulk rings, gaskets/seals and main shaft. Ooh no more output shaft wear
[/URL][/IMG]
Assembled new main shaft.
[/URL][/IMG]
Built it all back up into the centre plate.
[/URL][/IMG]
Stuck the main casing on.
[/URL][/IMG]
Extension case fitted and it's done
[/URL][/IMG]
But over the last week I've rebuild this lt77
Never done one before but went surprisingly well.
How it looked before I started.
Casing cleaned.
Epoxy primer. Bloody good be not the cheapest stuff.
Painted in 2k satin black.
New bearings, Baulk rings, gaskets/seals and main shaft. Ooh no more output shaft wear
Assembled new main shaft.
Built it all back up into the centre plate.
Stuck the main casing on.
Extension case fitted and it's done
nice work wish I had the time and money to do that.
did manage to get the internal door handle working again after it failing once I had done the lock spring on the nsf door. then got my ball and pin tow hitch fitted in place of the borrowed one. then with the help of my mate fitted new vented discs to the front to match the replacement calipers properly and fitted his tow hitch I had been borrowing back to his truck so fairly productive day today.
did manage to get the internal door handle working again after it failing once I had done the lock spring on the nsf door. then got my ball and pin tow hitch fitted in place of the borrowed one. then with the help of my mate fitted new vented discs to the front to match the replacement calipers properly and fitted his tow hitch I had been borrowing back to his truck so fairly productive day today.
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Nothing today as such, Just more shed sorting out.
But over the last week I've rebuild this lt77
Never done one before but went surprisingly well.
How it looked before I started.
[/URL][/IMG]
Casing cleaned.
[/URL][/IMG]
Epoxy primer. Bloody good be not the cheapest stuff.
[/URL][/IMG]
Painted in 2k satin black.
[/URL][/IMG]
New bearings, Baulk rings, gaskets/seals and main shaft. Ooh no more output shaft wear
[/URL][/IMG]
Assembled new main shaft.
[/URL][/IMG]
Built it all back up into the centre plate.
[/URL][/IMG]
Stuck the main casing on.
[/URL][/IMG]
Extension case fitted and it's done
[/URL][/IMG]
I can see a little future for you there aaron in reconditioning all are gearboxes for us all
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Nice job
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Looking good Danny, plenty of rain this morning to wash the paintwork off
Cheers Pete getting there, so much easier now I've bought an air compressor and all the tools with it makes the job go faster and easier.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Wasn't too bad price wise to be honest. Think the bits came to £182. Plus some primer/paint and a few consumables, Probably £200 all said and done.
I can see a little future for you there aaron in reconditioning all are gearboxes for us all
Send 'em my way
Enjoyed doing it to be fair. Cheers
thoroughly enjoyed it.
pontyslapper
Brought a Landy to LZ11. Yay!!
- Posts
- 1,382
- Location
- Pontypridd
Started a leisurely stripdown of Drover ready to do the boot floor/sills in about a few weeks. Got the boot stripped back to the metal as I want to do a tidy job of it. You know coat it and paint it up to the windows and maybe route some cables for power etc so that I have options in the future.
Thought I had better start the 200tdi 110 as I haven't used it or moved it since July ish. Connected the battery and it fired immediately. Remarkable!
I took it for a drive, and as the fuel gauge doesn't work and I have only filled it once since buying it, I had no idea how much was in it. Only took £40; reset the trip. I wonder how far a full tank goes?
Its a loverly drive since I changed the oil and removed the spare wheel from the rear door.
I took it for a drive, and as the fuel gauge doesn't work and I have only filled it once since buying it, I had no idea how much was in it. Only took £40; reset the trip. I wonder how far a full tank goes?
Its a loverly drive since I changed the oil and removed the spare wheel from the rear door.
