DastardlyDan
Active Member
- Posts
- 287
I took mine off... with some tin snips, and pliers....
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
Oil and filter change.
Treated the exterior plastic to a couple of coats of forever black
Treated the exterior plastic to a couple of coats of forever black
guineafowl21
Well-Known Member
- Posts
- 3,349
- Location
- Inverness
Put a new AP clutch in our 02 Td4. Not a job I'd want to do every day! I might hire an engine hoist and drop the engine out if I have to do it again.
GrumpyGel
Well-Known Member
- Posts
- 26,393
- Location
- Christchurch, New Zealand
Put the battery on charge. Has our first frost of winter a couple of days ago and this morning there wasn't enough juice to turn the motor over. Should I bother charging it, or just bite the bullet and replace it? Can't remember if/when we've replaced it.
lenny1234
Active Member
- Posts
- 315
- Location
- East Anglia
Finally replaced the 'repaired' brake switch with a new one - intermittent twin amigos..
kourgath
Member
- Posts
- 30
- Location
- Cornwall ?Devon border
lenny1234
Active Member
- Posts
- 315
- Location
- East Anglia
kourgath
Member
- Posts
- 30
- Location
- Cornwall ?Devon border
NeilTD4
Active Member
- Posts
- 385
- Location
- Warwickshire
Replaced the vacuum hose that runs to the EGR solenoid, bit of a fiddle getting the new one on the solenoid mostly by feel…
Managed to route the hose better so it shouldn't rub on other bits and pieces…
Washed it too!
Managed to route the hose better so it shouldn't rub on other bits and pieces…
Washed it too!
kourgath
Member
- Posts
- 30
- Location
- Cornwall ?Devon border
It took less than half an hour for the chrome rings, but nearer 2 hours for the RonBox switch (plus all the swearing). Trying to fit the cable from the switch through the bulkhead
eventually got it through where the bonnet release cable exits.
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Crashed it...... Some old man drove across all the parking bays straight out in front of me.... 
GMC85
Member
- Posts
- 58
- Location
- N. Ireland
Done my annual filters change. Oil change and new MAF sensor scheduled for Saturday weather permitting
Had oil and filter change + MOT..... it passed with only 2 advisories
2 back tyres have only 3mm tread - was going to change these anyway, and rough running at idle. I have iCarsoft i930 which tells me this is injector 1 (P0263). Really urprised it passed as it billows out white/blue smoke when cold (smells of unburnt diesel).
Anyway, happy it passed.....
2 back tyres have only 3mm tread - was going to change these anyway, and rough running at idle. I have iCarsoft i930 which tells me this is injector 1 (P0263). Really urprised it passed as it billows out white/blue smoke when cold (smells of unburnt diesel).
Anyway, happy it passed.....
DastardlyDan
Active Member
- Posts
- 287
kourgath
Member
- Posts
- 30
- Location
- Cornwall ?Devon border
Bu&&er
Doesn't look that terminal so I hope it gets fixed and Winston Wolf makes the old geezer 'disappear'
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Bu&&er
Doesn't look that terminal so I hope it gets fixed and Winston Wolf makes the old geezer 'disappear'
Hope it's just the bumper , and spot lights the other car was a lot worse off!
NeedleNose
Active Member
- Posts
- 227
- Location
- Plymouth Area
Doesn't look too bad, hopefully just the bumper that's pushed the bonnet up. It's a big empty space behind that dent in the bumper so may be lucky.
Freelanders are surprisingly tough, had an accidental side swipe with a BMW X3 a month or so ago. Big dent in his front wing and maybe a crease on the bonnet. Mine had a bit of black BMW paint on the rear plastic arch.
Freelanders are surprisingly tough, had an accidental side swipe with a BMW X3 a month or so ago. Big dent in his front wing and maybe a crease on the bonnet. Mine had a bit of black BMW paint on the rear plastic arch.
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Similar threads
