What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Not today but on Friday I stripped out the load space and laid some extra sound deadening CCF which has cut the exhaust sound almost completely.

Also replaced the headunit and separate BT hands free with a headunit that does both.
 
Fitted anti roll bar poly bushes and got to know more of the underside of the car, think I need a new inner drive shaft gaiter, there is a line of grease around the engine bay. Oh and took it to the west of Ireland and back and not one hiccup :)
 
Fitted a Android mirror with a 5" capacative touchscreen, front and rear camera, GPS, ++.

KW7Z6O.jpg



lfBo7k.jpg



FIbyyt.jpg



6RG1F4.jpg



6uwOF3.jpg
 
Last edited:
cut full bore isolator valves into the hot & cold supplies, removed the old mixer, fiited new taps with tees taking a supply off the taps to a thermostatic mixer -used the discs out of an old HDD to make nice shiney cover plates where the new taps went in....no...wait...this is what I did to my BATH today :frusty:

Cheers
Simon
 
Well this weekend fitted a new headunit to work with my phone and recharged the air-conditioning, amazing difference ice cold and all my calls and texts plus tunes with no cables :)
 
Also gonna fit a 7" double din Android unit in the center console :D

Been trying to get those two champagne colored sides wrapped with some dark CF film today. Its very annoying when youre almost there, but the film gets a tear. It have happened to me two times now.

m4l8RX.jpg
 
Forever black' the external plastic. Got nearly 2 coats on and felt some spots of rain on my head. It's stopped now but I hope I don't go out later to find a black tide mark around the car...
 
Today i have been busy working on the Freelander. After around 4 hours all i have to show for is fitting a hazard switch to the center console. Lets just say im not gonna wrap it with CF :D

The reason for fitting a hazard switch to the console is im gonna fit the console to a pre-facelift FL1. Its a Saab 9000/9-5 switch.

Mp1CLD.jpg



CBEZlx.jpg
 
NeilTD4 said:
That's a ball ache Dangermike, the damage didn't look that bad…



Any plans to buy it off the insurance and get it back on the road?
Click to expand...


I didn't think so either! But there was steering damage. Which means automatic write off apparently ....

My insurance don't allow to be bought back, however I just bought this :) ImageUploadedByTapatalk1433456660.351251.jpg
 
Well not exactly done anythng to t, but a new to me 55 commercial freelander driven to work for the first tme after collecting last night.
A few issues to deal with, gearbox jumps out of 2nd, so sourcing a replacement box and clutch while I am at it alarm went of last night so been reading this forum as to why looks straight forward.

Now whilst getting clutch changed looking on this forum for advantages to change to a solid flywheel, as have seen converson kits and I am guessing there must be an advantage.

Now looking forward to many hours fixing landy faults ;)
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
809
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
434
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
916
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
684
Hippo
Hippo
Back
Top