Stone56
Well-Known Member
- Posts
- 3,333
- Location
- Up a mountain
Could make a raft from the wood from the pallets more fun than poking things with bamboo
What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Could make a raft from the wood from the pallets more fun than poking things with bamboo
Set the Valve Clearances, even on a 230k mile 300tdi it’s quieter! (Well, relatively!)
New Front ARB bushes tomorrow, fit the carpet set and sill covers (stainless, bit blingy!) touch up the paint where primer currently lives and it’s done.
The before and after pics will flow…
I was thinking respray, but that’s for the next owner to decide!
New Front ARB bushes tomorrow, fit the carpet set and sill covers (stainless, bit blingy!) touch up the paint where primer currently lives and it’s done.
The before and after pics will flow…
I was thinking respray, but that’s for the next owner to decide!
Done nothing on the 90 for Two Days - I have no guilt - I celebrated the Platty Joobs by drinking a lot of this…
It’s the house WeisBier in a rather splendid bar nearby…..
It’s in Amsterdam by the way, if ever your there - do visit, huge beer menu and top notch scran….
https://www.debiertuin.nl/
It’s the house WeisBier in a rather splendid bar nearby…..
It’s in Amsterdam by the way, if ever your there - do visit, huge beer menu and top notch scran….
https://www.debiertuin.nl/
Hicap phill
Well-Known Member
- Posts
- 16,363
- Location
- Wiltshire
Are you searching for essential parts or luxuries?I’ve not done much to the 90 either. But I’ve been surfing eBay for parts for it that I don’t really need but want. Does that count???
I consider it all essential in its own way. I would deem anything luxury, other than coil springs and a working heater!
congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
Finally painted the doors after much delay and prevarication. Get them fitted and maybe go for the first MOT since 2008.
congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
Hung a door. Yippee.
Bought a mantec SwingAway spare wheel carrier on eBay. It looked much better quality than many. Unfortunately, Parcelforce were a bit quicker delivering it than I anticipated and Mrs K got to it whilst I was at work… Still, I didn’t get too mech of an ear bashing and it’s safely in the garage awaiting that rare day that I can fit it, together with numerous other bits I’ve acquired!
Still, I didn’t get too mech of an ear bashing and it’s safely in the garage awaiting that rare day that I can fit it, together with numerous other bits I’ve acquired!NewbieWithA90
Member
- Posts
- 33
- Location
- Derbyshire
Today I started fitting the MUD dash Got the dash cut and mounting plate on and secure, just need to work out where I could put a hole to run the pipe for the oil pressure gauge straight in to it
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
swore repeatedly
Rich.
Rich.
- Posts
- 9,113
- Location
- North Lincs
What's up Rich?swore repeatedly
Rich.
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
stumpyj
Active Member
- Posts
- 115
- Location
- Perth, Scotland
Replaced the rear door hinges on Landy as she was rattling everytime we went over a bit og gravel
Now even though I have pretty much replaced everything on Landy over the last 3 years I fell in to the trap of watching youtube videos of how easy it is - BIG MISTAKE.
Every bolt door side came out no problem. Every bolt on the other side not so much. Wasted an hour trying to get them out with various things then just got my trusted angle grinder out and just butchered the hinges and then nipped off the bolt. heads.
All of the worst jobs on Landy have all been to do with siezed or rusted bolts! Ogh and 2 nuts were imperial !!
Anyhoo all sorted and the back door is now beautifully smooth and all the bolts copper greased for next time!
Stumpy
Now even though I have pretty much replaced everything on Landy over the last 3 years I fell in to the trap of watching youtube videos of how easy it is - BIG MISTAKE.
Every bolt door side came out no problem. Every bolt on the other side not so much. Wasted an hour trying to get them out with various things then just got my trusted angle grinder out and just butchered the hinges and then nipped off the bolt. heads.
All of the worst jobs on Landy have all been to do with siezed or rusted bolts! Ogh and 2 nuts were imperial !!
Anyhoo all sorted and the back door is now beautifully smooth and all the bolts copper greased for next time!
Stumpy
We’ve all had it!Landroveritus
Rich.
- Posts
- 1,512
- Location
- Somerset (but I'm a Landanna)
Had a look at why the beacon switch isn't working. It seems it is working, just that the tell-tale LED has burned out again.
Ordered a new one. Again!
Ordered a new one. Again!
Similar threads
