congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
There’s various pictures in this thread but I didn’t do a separate thread for it. In hindsight I could have. i have loads of photos myself if there’s something you need to see.
What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dr Strangeglove
Well-Known Member
- Posts
- 705
- Location
- Lancashire
Thanks Congo, I will look at your build thread. I have just had a quick look and it looks like a nice job you are doing - well done.
Dropped the under tray so I could get at the exhaust down pipe nuts, christ I wish I hadn’t!
Years of oil and crud caked on everything, spent ages scraping it off into a pile.
Then got most of the exhaust off, downpipe studs were a comparative doddle - then realised I needed to drop the Anti Roll Bar to get the old pipe out.
That’s tomorrow morning then - too knackered
and a beery sunset beckoned
Years of oil and crud caked on everything, spent ages scraping it off into a pile.
Then got most of the exhaust off, downpipe studs were a comparative doddle - then realised I needed to drop the Anti Roll Bar to get the old pipe out.
That’s tomorrow morning then - too knackered
and a beery sunset beckoned
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
finalised the coolant system 
(fitted last 2 jubilee clips on top hose)
swore @ it again ('86 Ninety 2.5nad converted to Defender200tdi)
still not made the lower / turbo to intercooler metal pipe (how hard is a 18" length of 2" pipe & 2 jubilee clips) or started making the airfilter case brackets (Disco 200tdi filter housing into Ninety with Defender200tdi turbo setup)
swore @ it again
thought of a few more little / time-consuming jobs
swore @ it again
Rich.
(fitted last 2 jubilee clips on top hose)swore @ it again
('86 Ninety 2.5nad converted to Defender200tdi)still not made the lower / turbo to intercooler metal pipe (how hard is a 18" length of 2" pipe & 2 jubilee clips
) or started making the airfilter case brackets (Disco 200tdi filter housing into Ninety with Defender200tdi turbo setup)swore @ it again
thought of a few more little / time-consuming jobs
swore @ it again
Rich.
New slave and master after having no clutch... Couple hours later the slave finally came off must be the first time! Also found a new air cooling hole in the drivers floor. But we now have a nice feeling clutch and I can actually get second now
Hicap phill
Well-Known Member
- Posts
- 16,242
- Location
- Wiltshire
Have a beer & a sit down before polishing.Washed it. But now I’ve got the need to polish it too.
Still waiting on a local Indy to get back to me about the welding on the front chassis legs…
You don’t want to break out in a sweat
Fitted a new vacuum servo...which meant I had to disconnect the pedal from the servo clevis...which meant I had to remove the clutch fluid sensor to get at it...which meant I had to bleed the clutch as well as the brakes afterwards...I hate Defenders...
...I love Defenders.
...I love Defenders.
I don’t need telling twice! But I don’t know what would upset Mrs K more, me opening a beer during the day or spending time polishing the Landy!
congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
Made a little blanking plate to cover the old radio hole until I can decide what needs to go in it.
congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
I gave my second hand folding side steps some much needed TLC today, plus I visited Lynall and took some measurements of his cat flap for my project. He didn’t feel a thing!
Stone56
Well-Known Member
- Posts
- 3,216
- Location
- Up a mountain
Yesterday and today new pro bushes all round new bilstean dampers front done through the top went well but compressing them by hand is a b____ new demand exhaust from the cat 3in tail nice to see some quality now I have a lovely babal low down oil and filter change prop shafts greased drives like new now
congo181
Well-Known Member
- Posts
- 519
- Location
- Maidstone, Kent, U.K.
Just put the skin back on one of the repaired door frames. First time, and felt quite traumatic
Still, think it’s gone ok.
Still, think it’s gone ok.
- Posts
- 9,098
- Location
- North Lincs
Looking good!Just put the skin back on one of the repaired door frames. First time, and felt quite traumatic
Still, think it’s gone ok.
View attachment 265780
View attachment 265781
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Fetched some nice pallets ready for the wood burner, now chopped up and in the wood store. Feck you putin.
Stone56
Well-Known Member
- Posts
- 3,216
- Location
- Up a mountain
Need a bit of drainage there Flossie or is it a paddling pool
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Particularly heavy downpour, there is drain holes through the brickwork , they just clog up with moss/algae, need to poke me bamboo stick up em.
Hicap phill
Well-Known Member
- Posts
- 16,242
- Location
- Wiltshire
Just drill a 20mm hole in the lamppost it will help drain better
Similar threads
