What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill said:
So is this a 90/110 ;)
Did you get the steering damper conversion as well?

so looks like a GL steering arm?
(This is mine so threads look about the same on the track rods)

now have you got a leaking swivel or had you just over filled them? (Oil showing on disk )

View attachment 268433
Click to expand...

It’s a 90. Steering damper conversion ? Do you mean the clip kr bracket that goes onto the bars ?

Not sure on the swivel at first i thought it’s my oil cooler pipes as I know one has a split in it so it’s ****ing out that side which I need to do. I’m hoping it’s just the rain outside
 
Harry121 said:
It’s a 90. Steering damper conversion ? Do you mean the clip kr bracket that goes onto the bars ?

Not sure on the swivel at first i thought it’s my oil cooler pipes as I know one has a split in it so it’s ****ing out that side which I need to do. I’m hoping it’s just the rain outside
Click to expand...

1 of the attached (steering damper)
960B87AA-2E2E-489E-95EC-B5E20BD7732F.jpeg
 
Harry121 said:
I put some heavy duty steering arms on. Hoping you can help. The front one the track rod ends are both like have a lot of thread showing seems way too much ? I haven’t had tracking done yet but I don’t see that pulling them in tbat much ?
Click to expand...


The drag link doesn’t affect the tracking, the rear one does. Your steering wheel could be off a bit though
 
Fitted a rear door gas strut... Got to be one of the best things I've done yet. Not sure how I've lived without it. Also sorted some bits out for the MOT and put on some new pads !
 
Not today but last Thursday took Norman the 90 for the French equiv' of the MOT.
Passed :D:D:D:D:D:D the only advisories were for dents in the bodywork and doors FFS, they are meant to be there, they are honourable battle scars. Norm has had a fair old time playing/working in the woods.
 
The 90 went in to a local Indy to have two new chassis legs and front crossmember welded on. Not looking forward to the bill though… :rolleyes::(
 
Collected the 90 from. The local Indy guy who did the welding. It cost just over £1200, which was a bit more than I initially bargained for. However, he did the job properly, stripped the wings, radiator panel, radiator and some other parts off to get to it. The welding is a very tidy job which I’m impressed with. He painted it then treated it with dinitrol and fitted my replacement galvy bumper. The bumper has finished the front end off nicely too!
Next job, the MoT later this week…
 
Knappster said:
Collected the 90 from. The local Indy guy who did the welding. It cost just over £1200, which was a bit more than I initially bargained for. However, he did the job properly, stripped the wings, radiator panel, radiator and some other parts off to get to it. The welding is a very tidy job which I’m impressed with. He painted it then treated it with dinitrol and fitted my replacement galvy bumper. The bumper has finished the front end off nicely too!
Next job, the MoT later this week…
Click to expand...
And do the doors close better now?
 
A couple of advisories. A loose mud flap (!), the tow bar slider not fitted at time of test and slight play in one wheel bearing. I’ll take that! :D

With the welding done, a service, MoT and shiny galvy front bumper fitted, it’s good for another twelve months of Landy driving! :cool::)
 
Knappster said:
A couple of advisories. A loose mud flap (!), the tow bar slider not fitted at time of test and slight play in one wheel bearing. I’ll take that! :D

With the welding done, a service, MoT and shiny galvy front bumper fitted, it’s good for another twelve months of Landy driving! :cool::)
Click to expand...
Thought towbars were not an MOT for older motors?
 
You must log in or register to reply here.

Similar threads

DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
659
miktdish
miktdish
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
4K
Blob
Blob
Hippo
What have you done to your tratter today?
2 3 4
Replies
70
Views
7K
IamRobbie
IamRobbie
Hippo
What have you done to your tratter today?
2
Replies
35
Views
4K
dominicbeesley
dominicbeesley
Back
Top