What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Put the seat box back in today and got those pesky brackets sorted. She’s really coming along now.
Just fitted the hand brake lever back in - where does the metal P-clip on the handbrake cable screw to though?

C76F4EEB-8157-4AD1-9B39-A273E3D90865.jpeg
 
Found that the passenger side has 2 draughts. (Only realised as I have been demoted to that side of the motor for a few days)
So 1 is a piece of rubber between door tops(bit of double sided tape to resolve)
1 cheap door rubber too short.. find old piece and add extra to base.

plus side heater works well & mrs enjoys the landy(as drivers side has no draughts)
 
Started taking the fuel tank out, 5hrs later it’s still there as the last bolt is an utter b’stard to get free. All Rusted to buggery, can’t get sockets( 6or 12) or spanner’s to stay on, no access for a blade and, worst of all, the outrigger by the filler neck is held together by rust.

More bits ordered…..I hate Land Rovers
 

Attachments

  • 5C8EB0E3-EE12-45C4-8459-C90A01D1AEA8.jpeg
    5C8EB0E3-EE12-45C4-8459-C90A01D1AEA8.jpeg
    37.7 KB · Views: 139
  • 92D716DE-81AD-457F-9E07-41E4FE65D02A.jpeg
    92D716DE-81AD-457F-9E07-41E4FE65D02A.jpeg
    431.5 KB · Views: 143
Fitted some grab handles on the A Pillar... used Genuine Part door handles, and upgraded the screws to set screws... used M4 tap to cut thread into the existing mounts:

Grab Handle 002.jpg


The keen eyed may notice my temporary bodge... I used matchsticks wedged between the handle and the trim, which has worked to stop the handle rolling on the trim, now solid... just need to find a better solution - any ideas?
 
slomofo said:
Started taking the fuel tank out, 5hrs later it’s still there as the last bolt is an utter b’stard to get free. All Rusted to buggery, can’t get sockets( 6or 12) or spanner’s to stay on, no access for a blade and, worst of all, the outrigger by the filler neck is held together by rust.

More bits ordered…..I hate Land Rovers
Click to expand...
Been there, it's a right PITA that fuel tank bolt :(
 
That’s enough for today, finally got the knackered tank out after using many new words to encourage it…. Filler neck is cracked and the hoses all perished to boot, so now ordered.


De-Rusted, jetwashed the muck out of the crevices (word of the day) left to dry…..

Jenolite and paint during the week then back in the new tank will go!

I reckon H/D sills are the way to go, the mounts will slide in to the crappy outrigger and I can fill/under seal so it looks half presentable….
 

Attachments

  • 84D11A9B-7609-4A9B-A16A-5BD19F27FB04.jpeg
    84D11A9B-7609-4A9B-A16A-5BD19F27FB04.jpeg
    275.8 KB · Views: 151
  • 3676BC8D-48BB-4F7A-AE8C-4F19BB34E334.jpeg
    3676BC8D-48BB-4F7A-AE8C-4F19BB34E334.jpeg
    171.5 KB · Views: 144
I collected my latest eBay purchase, a good condition galvanised front bumper, for the 90. It came from a very genuine nice chap who lives in the north Cotswolds. We chatted landies and classic cars for a bit and I had some serious garage envy at his three bay detached garage with four post lift and workshop! :D:D

Just got to find time to fit the bumper now… :rolleyes:
 
slomofo said:
It’s nearly done, rain stopped play…
View attachment 262653 View attachment 262654

Judicious use of angle grinder on one tab on the sill and it slipped straight in - fitting all the bolts was still a faff mind!
Click to expand...
E9F6C095-581A-4794-93D2-5530265118E5.jpeg


It is done hurrah! Under seal to cover the scabbiness and on to the next job.

Never changed a fuel tank in a 90 before, won’t rush to do another :)
4207C65D-1EAE-46E9-AD85-29DA2D5B113B.jpeg
 
Finally got round to adjusting the tappets on my 200Tdi 90, only 3 years after I was going to do it. Other things got in the way so it kept being pushed to the back of the queue. Quite suprised how little adjustment was needed, took much longer than expected cos I couldn't find the taper bungs to go under the cover fixing bolts. Had to near turn everything upside down before I found them. I think I have too many storage boxes of spares/useful parts.
 
You must log in or register to reply here.

Similar threads

DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
651
miktdish
miktdish
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
4K
Blob
Blob
Hippo
What have you done to your tratter today?
2 3 4
Replies
70
Views
7K
IamRobbie
IamRobbie
Hippo
What have you done to your tratter today?
2
Replies
35
Views
4K
dominicbeesley
dominicbeesley
Back
Top